In order to save money, when installing stainless steel doors, many friends would rather choose to learn about it online, purchase the materials, and then install it directly by themselves, but troubles will come one after another. Therefore, this article will share with you how to install the stainless steel door after the door is obtained, so that you can save yourself from worries.
1. Conventional installation method
1. First, measure whether the size of the stainless steel door and the installation opening are the same. If the size of the opening is smaller than the steel door, then The gray skin needs to be eradicated.
2. Place the steel door flat according to the position of the hole, then use an M12 drill bit to drill the four mounting holes in the door frame, and fix them with M12 bolts before adjusting.
3. Adjustment method: Use the outer surface of the door leaf as the reference plane and check whether the door frame is parallel to the door leaf after installation. If the door frame is not parallel to the door leaf, add wooden pads on the back of the door frame near the screws until the door leaf is parallel.
2. Cement filling method
1. Because the door frames of stainless steel doors are basically hollow, in order to make the anus stronger, cement must be filled in the hollow of the door frame. After filling the cement, close the door. Please note that paper pads should be placed on the opening surface of the door leaf and between the door frame and the door leaf.
2. Do not overfill the cement, otherwise it will deform the door frame and affect the use and opening of the door.
3. After filling cement 4, remove the paper pad, gently open the door leaf, use a screwdriver to scrape off the cement in the drilled parts of the frame, and then cover the installation holes.
4. If the frame is not filled with cement, it will affect the use function and you will be responsible for the consequences.
3. Installation method of installation piece
1. Remove the door leaf, put the door frame into the door opening, and use a level to check whether it is placed vertically. If it is not level, use wood chips to level it.
2. First use the inner door hinge side as the reference edge, rotate the mounting piece on the door frame reinforcement to be perpendicular to the door frame, then bend the mounting piece and fix it to the wall with cement nails.
3. Put the inner door on the door frame and lock it. While ensuring it is straight, fix the inner door lock side mounting pieces on the wall one after another.
4. Use the same method to put the outer door on the door frame and fix the mounting piece.
5. Check whether the inner and outer door switches are flexible. If there is any abnormality, insert wood pieces for further adjustment.
6. Stuff wood chips in the gaps between the door frame and the wall to make the door frame more stable. Then pour cement mortar into the door frame. After the cement mortar solidifies and dries, take out the wood chips outside the door gap before using the door. function, but within 24 days, try to reduce the number and intensity of activation.
Among the three stainless steel door installation methods introduced above, which method is more suitable for the stainless steel door installation in your home?