1. The trunk lid and hinge are usually fixed by four screws. Open the trunk and loosen the first screw on each hinge.

2. Push the tailgate cover left and right, gently reduce the alignment until the clearance on both sides is almost the same, then gently open the tailgate cover and tighten the screws.

3. If one screw on both sides cannot be adjusted in place, loosen all screws, adjust the position of the tailgate cover, then tighten the screws on both sides, adjust the position again, and finally tighten the two screws on the top.

4. After adjusting the clearance of the rear trunk lid, try to open and close the rear trunk lock for many times to ensure that the lock machine and the lock catch can be aligned, otherwise, loosen the screw of the lock catch on the rear panel to adjust the lock catch position; Or knock the lock with a hammer to align it with the lock machine.