It can be repaired, that is, the traditional girder rectification operation. Restoring the dislocated girder to its original position is called rectification. However, the strength of the renovated girder is definitely not as good as that of the original factory. Automobile beam generally refers to the longitudinal beam of an automobile, that is, the part extending from the front of the car to the rear of the car. The following conditions are not available: the deformation of the automobile girder, whether serious or not, has seriously affected the stress point of the vehicle balance. After the deformation of the girder, the height of the car body will be different, and the vehicle will not drive in a straight line, resulting in uneven tire pressure, and then a tire puncture will occur. The deformation of the girder will also lead to the driver's unstable control of the car, which is prone to accidents. The deformation of the girder must be corrected by the automobile girder corrector. You can go to a garage with complete plastic equipment and good technology for repair, and it won't have much impact in the future. If it can be repaired, it can still be used, but it can't have no effect at all. The whole girder will not be as strong as before.