To hand-make a washing machine sink, you need to prepare the following materials:

1. Square plastic bucket (recommended size is 50-60L);

2. Saw and drill Hole tool;

3. Water pipe joint;

4. Duct tape;

5. A hammer;

6. A hand drill.

Production steps:

1. Place the plastic bucket on a horizontal surface, and use a hand drill and a drill bit to drill out the hole for the sink and the hole for the water pipe;

2. Use a saw to cut off the three corners inside the bucket to make it a trapezoid;

3. Install the water pipe joint to the hole and secure it with duct tape;

4 .Use a hammer to expand the size of the plastic bucket of the washing machine sink to the appropriate size;

5. Use tape to fix the corners of the sink mouth and make sure there are no holes;

6. Place the sink under the washing machine and connect the water outlet pipe to ensure that water can flow into the sink;

7. Test whether the sink can work normally.

Notes:

1. Before making a sink, you should ensure that the selected plastic bucket has a certain thickness and strength to ensure that it can withstand the vibration when the washing machine is operating;

2. When cutting the bucket, you should pay attention to safety and use gloves and goggles;

3. Place the sink on a stable ground and make sure there is no leakage at the water pipe connection;

4. When cleaning the sink, use neutral detergents and do not use strong acid and alkali detergents.

The above is how to make a washing machine sink by hand. I hope it will be helpful to you.