Those who ask are tired, and those who answer are tired. We have coordinated several issues, please note:
1. Unable to create new file. This is a printer installation failure. Delete the original printer or network printer, and then reinstall the local printer. If there is no local printer, please install the virtual printer that came with the system.
2. The file is damaged and cannot be opened. In this case, consider backing up files first. If you don't set it in the CDR, it will be automatically backed up every 10 minutes. The file name is: file name _ automatic backup. If you want to open it, just rename it, remove the "_ automatic backup" behind it and change it to "XXX". You can open it directly with CDR. Novice or novice.
3. The question that the text turns into a curve suggests that if you want to print it out or take it to another computer to open the same file, the text must turn into a curve, otherwise it will be unrecognizable when you open it. In addition, note that after the text becomes a curve, the text can no longer be edited. It is best to save two files, one of which is a text type and the other is a curve type, for future use.
4. The problem of paragraph text turning into curve can be solved by freezing in the filter. Draw a black rectangle on the paragraph text, open the filter-Transparency-100%, check Freeze, and then remove the text layer behind, leaving a curve.
5, paragraph text typesetting text is less, use the art file (that is, click the text input tool to type directly in the middle of the page. There are many words, so you can use paragraph words (click the text input tool to pull a dotted box in the middle of the page and then type the text) to convert them to each other. Pay attention to full-width and half-width punctuation. CDR compatibility is not very good. If you don't believe me, try using full-width double quotation marks. The text is all gone. The solution is not to type in special symbols such as single quotation marks. Supplemented separately. If there are many words, it is suggested to use PAGEMAKER for typesetting, or type the file in WORD first, then copy it, and then pull a paragraph text box in CDR for pasting. Note: In WORD, do not use spaces at the end of a paragraph. Go back to CDR and select the text format, so that the two ends are aligned, the line spacing before the paragraph is the same, and the paragraph is 0 after it. Other defaults are enough.
6. The first problem of bitmap rendering is to use the shaping tool to pick up the bitmap, and to shape the outer contour of the bitmap by adding or deleting nodes and bending nodes, so as to achieve the purpose of removing the excluded bitmap. The second problem is to use the color mask tool in the filter, adjust an appropriate extension, pick up the background color to be removed, and click Apply, which can also remove the relatively monotonous base color map, which is good for transparency.
7. Exchange of 7.PSD and CDR files. If you want to use CDR files in PSD, you need to output JPEG format. PSD can only directly input CDR, and the retained layers can only be edited after dissolution. Note that when CDR outputs bitmaps, attention should be paid to the scale and actual pixels. If you output them once, you need to click the lock on the right to return to the current scale.
8. Simple multi-outline font, you only need to enter text. If you want several contours, copy a few, thicken the thickness and color of each contour in turn, and then arrange them in the order from coarse to fine and from back to front.
9. Simple shortcut key: ctrl+a Select All Delete Delete Delete Delete Delete Delete Regret ctrl+x Cut ctrl+c Copy ctrl+v Paste E Horizontal Center Alignment R Right Center Alignment T Up Alignment B Down Alignment C Vertical Center Alignment L Left Center Alignment F4 Return to Standard Page F9 Full Screen Spacebar Switch ctrl+t Text Format between the current tool and the previous tool CTRL+Shift+
10, equal proportion of irregular figure If you draw a square, you are required to zoom in or out: you can zoom in and out by holding down SHIFT and clicking on the corner, but if you try to draw a rectangle, you can't zoom in and out like this, let alone irregular figure. The solution is as follows: first draw an irregular figure, calculate the scale to be reduced, for example, enlarge it by 5MM, and then select the irregular figure. Adjust the thickness of the outline to 10MM, and then convert the outline into an object in the arrangement menu. After breaking it up, you will get three proportional lines. I will choose what I want.
1 1, CDR ranking prompt, don't talk about single sheet, pay attention to 10 set of full-page color jet, if according to the standard: 55X90MM, pay attention to leave 1MM space in the middle for cutting, and it is best to set corner lines around the corners for alignment, with vertical lines in the middle.
12, bitmap color selection If you import a bitmap and you want to make a few characters in a certain color on the bitmap, you may not find the same color in the palette. Try the straw tool on the left. If the eyedropper tool fails, please remember to convert the bitmap into a bitmap first, because once you edit the bitmap with the plastic tool, it is not a bitmap.
13. Opening a simple CDR file is very slow. I don't know if this is a file virus or a CDR BUG. Anyway, many people meet. The solution I know is to open this file first and output it in CMX format, then reopen the CMX file and convert it into a CDR file. This can be solved, but there may be some changes in the detailed text. It is best to turn the text into a curve before outputting.
The common formats of vector software such as 14 and CDR are CMX, EPS, EMF and WMF.
15, CDR files should be exported to Wen Tai for carving, and first exported to PLT format. Even better, 1: 1, and pay attention to the words without outline, otherwise it will be engraved twice in the same position, resulting in paper breakage.
16, the problem of CDR color changing to fluorescent color, this question has been asked by many people in the bar recently, so we should give a unified answer. The first method: the problem of fluorescent color is the problem of color description file. Click (Tools)-(Color Management) and a window will appear. Adjust the window to adjust the color, and the color of CDR will be blocked. You can adjust it to be close to the printing color or download the description file here.
The second method:
1. Tools → Folder Options → View → Show all files and folders.
2. Find the Graphicsll folder and delete it completely C: \ Documents and Setting \ Application Data \ Corel \ GraphicsLL <; Delete this folder > after deleting, restart Coreldraw 1 1, the color will be re-read, and it will be OK!
17: When CorelDRAW has other inexplicable problems, restart the CDR and press F8, and the CDR will return to the default state when it was first installed.
18: It's quick and simple. Some shortcut keys are often used and can be customized. Then drag them to the status bar at the bottom, which saves the trouble of ordering menus.
19: Copy the text and fill it with color. If A and B are used, to copy the text and color of B to A, first click B, remember to right click, then drag it to A, and release the mouse to choose to copy all the attributes.
20: Customize the reconciliation path: first reconcile the linear effect of A to B, then draw a path, click the new path attribute, and then click the path curve to make an interactive gradient along the path.
2 1: Tool Tips: When you use the selection tool to shape a curve, you will often find that the lines are too sharp or stiff to be soft and natural. At this time, you only need to add a node on both sides of this node, and then double-click this node to delete it, and the natural line will become soft.