Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - Safeguard measures for safe construction of engineering projects?
Safeguard measures for safe construction of engineering projects?
Safeguard measures for safe construction of engineering projects are very important. The formulation of each measure is based on the actual situation, and it is even more important when choosing. Zhong Da Consulting will explain the safety construction guarantee measures of this project to you.

First, establish and improve the safety production guarantee system

The project manager is the team leader, and the construction site safety production management team consists of department heads, team leaders and full-time and part-time safety production inspectors. The project department has two full-time safety officers, who have the right to order a division to stop work for rectification due to safety problems, and each construction team leader is a part-time safety inspection supervisor.

1, implement the safety disclosure system. Before construction, the Quality and Safety Department shall make a written safety disclosure to the construction team, which shall be signed by the construction team leader and promptly disclosed to all personnel.

2. Implement the safety inspection system before construction. Before construction, each team shall conduct safety inspection on the construction site, and if any hidden danger is found, the construction can only be carried out after it is solved by relevant personnel.

3, strengthen the safety awareness education of construction personnel, improve the awareness of self-protection, safety education for employees before construction, and then regular and irregular safety education, strengthen the awareness of safe production and civilized construction.

4. Establish a responsibility system for production safety, organize regular production safety inspections, and establish a production safety assessment system. According to the provisions of the responsibility system for production safety, conduct appraisal, reward excellent teams and individuals in production safety, and criticize or even punish teams and individuals who do not pay attention to production safety.

Second, the main prevention and control measures

1, all personnel entering the site must wear safety helmets, work high above the ground must wear safety belts, and safety warning signs shall be set on the construction site.

2. Protective articles such as safety helmet, safety belt and safety net used on site should be checked regularly. Do not meet the design and manufacturing requirements is strictly prohibited.

3, structural engineering to the second floor, scaffolding or safety net must be set up in accordance with the provisions.

4. Before the arrival of typhoon, flood season, cold winter and high temperature season, corresponding safety technical measures should be compiled and implemented according to the seasonal characteristics, and safety inspection should be carried out to ensure safe production.

5. Stairs, access openings, derrick openings of projects under construction, holes, pits, ditches and other dangerous places on the construction site should be fortified and guarded according to regulations, and isolation and protection measures must be taken for vertical operation.

6, construction personnel must strictly implement the six disciplines of production safety on the construction site.

7. All hoisting machinery must be installed according to national standards, and can only be used after it is accepted by the power equipment department. During use, the maintenance system should be improved, and the safety protection device should be kept complete and effective.

8, derrick must be installed according to the requirements of the derrick lifting equipment safety technical regulations, after acceptance by the power equipment department, before use. In the process of use, it should be operated and maintained by special personnel, and its safety protection devices and protective facilities must be kept intact and effective.

9. All mechanical and electrical equipment shall be operated by specialized personnel with certificates. Non-professionals are not allowed to use electrical equipment, and the power supply equipment should be closely covered, regularly checked and equipped with leakage protectors.

10. Double-layer safety sheds are set below all vertical transport machinery, and safety nets and protective railings are set up outside.

1 1, site construction electricity should be arranged and erected in strict accordance with the relevant provisions and requirements of Technical Specification for Temporary Electricity Safety on Construction Sites, and the sensitivity of breaker, socket and leakage protector should be checked regularly to ensure the safety of daily use.

12. Strengthen fire safety education of construction personnel and on-site fire management. Fire fighting equipment is fully equipped, and its placement meets the fire fighting requirements. Regularly check and replace the medicine of the fire extinguisher to keep the fire fighting equipment in a good standby state.

13, get the weather forecast data at any time, take wind and rain prevention measures in advance according to the weather forecast, and strictly follow the measures, and reasonably arrange the on-site construction and production.

14. Smoking is strictly prohibited on the construction site, and the use of naked flames must be approved.

Third, the safety production contract management

Provide safety education to every worker who enters the site in time, and sign a safety production responsibility contract with him in addition to distributing safety knowledge manuals, so that every worker who enters the site can understand that he will bear the main responsibility for any safety accident caused by violating safety operation regulations, so that people can be vigilant and always take safety production to heart.

Similarly, the project manager department will sign a safety responsibility contract with every manager, so that all personnel involved in this project can greatly improve their awareness of safety in production.

Four, the construction site safety identification

In addition to safety protection measures, eye-catching signs should be hung around, holes, passages, stairs and other places prone to safety accidents.

In the general layout of the site, enough safety production education signs should be hung at all passages and gates where there are many people, so that everyone can always remember the importance of safety production.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd