Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - How to polish the gloomy wood in Jin Sinan?
How to polish the gloomy wood in Jin Sinan?
It is difficult to polish Jin Sinan, so it is generally recommended to follow the following procedures: 100 (hereinafter referred to as sandpaper) should be molded in place at one time, and 300, 500, 800, 1000, 1500, 2000, 2500 and 3000 can be added step by step (in the middle) The principle of grinding is that the last grade sandpaper removes the grinding traces of the previous grade sandpaper. Polishing according to the procedure is the fastest and most labor-saving method. If you don't polish according to the procedure, for example, from 500 to 1500, you have to hone your temper. It is estimated that you can't get rid of 500 wear marks a day. It is best to grind the sample by hand, and the speed needs to be greatly reduced by electric grinding. The high temperature of the electric mill will burn the wood, and the original fragrance of Jin Sinan will not be smelled if the smell goes into the wood, at least it will be seriously affected. High temperature will also accelerate the volatilization of Jin Sinan aromatic oil. The process of polishing is also a process in which players are familiar with woody plants. Try to collect oily wood powder, which can be used for incense and restoration in the future. Supplementary grinding method: dry grinding or wet grinding? Jin Sinan can only dry grind, but can't see water. Polished surfaces are prone to pilling and cracking when exposed to water.

Because the real Jin Sinan is oily and wastes a lot of sandpaper, it can be recovered by cleaning and polishing sandpaper, so that sandpaper can be used repeatedly. When reaching high grade, flexible support can be used and a piece of cloth can be put under the sandpaper, which is economical and can avoid the sticky particles of high grade sandpaper from scratching the wood.

It is recommended to seal the wax to keep the fragrance longer. Natural beeswax itself has a slightly sweet fragrance, which is consistent with that of Jin Sinan. You can do without beeswax and paraffin. Methods: Dry-coat the surface carefully and evenly, fold the high-grade facial tissue properly and rub it until it is bright. Burning wax is not recommended, because wax will discolor wood. There are different ways to play about whether to seal wax. Jin Sinan belongs to cork and gets dirty easily. In contrast, waxing is better. Jin Sinan belongs to cork, so it is forbidden to scrape nails, touch hard, fall to the ground, get wet, etc. Don't put a bag with keys, etc. Use pure cotton cloth or a plate with gloves for the first two months, and then get used to it gradually until it is wrapped. The patina is a layer of transparent perlite, which is very beautiful.