Everyone knows that wood carving technology has a history of thousands of years and profound cultural heritage in China. With people's living conditions getting better and better, they like to buy wood carving techniques and put them at home. Woodcarving crafts not only have a good moral, but also are very beautiful, which can enhance family taste and personal taste at home.

However, wood carving crafts are carved from wood. If this material is placed improperly during storage, such as in a vent or indoors, it is easy to crack. After all, it is dry. If a woodcarving craft is flawed, it is no longer perfect. What should I do if the wood carving process cracks inevitably?

Woodcarving crafts are easy to maintain, but the repair method after cracking is a bit difficult to learn. You can learn some professional remedies.

First of all, we must determine what material the woodcarving crafts are made of. Because there are many kinds of wood, if we can determine what material it is, we can better repair the cracks, and it is best to repair it with the same material.

Grind the same materials as wood carving process into powder, then add water to make paste, be careful not to be too thin, so that the consistency is moderate and optimal, and then fill the paste powder into the gap. After drying for a few days, repeat, fill and dry until the cracks in the wood carving are repaired and leveled.

Then the woodcarving crafts are polished. From a professional point of view, it still needs a certain technical content. It is necessary to polish the joint filling of wood carving first, and then paint it after its wood is exposed.

The filling and polishing of the above two processes can basically repair the cracks in wood carving. But these tasks require great patience and should be done step by step. For example, the process of wood carving joint filling should not be rushed, but repeated several times. And when polishing wood carvings, be very careful and do it several times. It is necessary to keep the polished part in harmony with the overall color, so as not to make the whole wood carving handicraft have color difference.

There are also small cracks that can be repaired by the simplest maintenance method, but the effect will not be the best. You can first drop 502 glue into the gap, then immediately polish it with high-density fine sandpaper and dry it. Some cracks are relatively small, so you can inject some specific paint and then treat the lower surface. If the cracks are large, it is necessary to repair them with wooden blocks of the same material, and then repair the surface with raw lacquer. You can also fill in the cracks first, then repair them with glue, and then polish them.

In fact, small cracks are not recommended to be repaired if they do not affect the appearance. If cracks appear, we should pay more attention to maintenance to prevent them from increasing. Wood carving crafts without cracks are basically carved after wood has been air-dried for a long time. They are old materials and will be more expensive in price. Another possibility is that the wood is coated with glue and then polished.

Usually, we must pay attention to the maintenance of woodcarving crafts, and gently rub the surface of woodcarving crafts with dry cotton cloth, because after woodcarving is placed for a period of time, the pores of wood will be loose, and the dry-wet balance of the inner layer will be easily destroyed. Friction can close the loose pores in time to prevent cracking.

Now there are many shops that specialize in repairing cracks in wood carving crafts. If you feel that you may not be able to fix it, you can go to a professional to deal with it, and the effect will be better.