It’s actually very simple to do it yourself. If you want to make a static car model yourself, I will teach you a few simple hand-made methods and the materials you need to prepare.

A few simple steps are required.

1

Glue

. 2. Cardboard. The material of cardboard can be the cardboard of that kind of carton. Computer brand or instant noodle delivery paper boxes are acceptable.

3. Prepare 2 thin iron sticks. The structure is actually similar to that in a four-wheel drive vehicle.

4 Making tires is very simple, just draw 2 circles on the cardboard. The same size, and then draw a short rectangle to connect the two prototypes in the middle for the tire. Use glue to connect and secure. Drill holes in the center of the circle to facilitate penetration and fixation of iron drills. And so on until you have 4 tires.

5 The body is made. For this, you can find a car model you like online and draw the floor plan of the car on paper. Remember to draw 2 identical ones. After all the processes are completed, start measuring the length with a ruler. Draw a dotted line 2 mm from the edge of the image to facilitate cutting.

Remember that the fitting place must be drawn, otherwise the two cardboards will not stick together. Finally, the length and width of the top of the car are also measured with a ruler. Make a mark on the place where the glue is just right (here it refers to the fit between the roof panel and the body on both sides)

Finally, you can drill holes to make windows.

6 If you want to make it more vivid, you can make a body chassis. All the production methods can be used by analogy. You can make a steering wheel or a chair. Finally, the upper and lower fitting (that is, the fitting of the bottom panel and the body) model is basically formed.

7. You can try to color and paint the color you want.

Hope this helps.