Installation and use: Select a suitable paint remover, install a suitable grinding wheel on the machine, put one or more enameled wires between the two grinding wheels, adjust the two grinding wheels until the enameled wires are slightly clamped, hold the coil part by hand and start the switch to test the paint stripping (stripping) effect. The ideal paint stripping effect can be controlled by adjusting the pressure of the contact surface between grinding wheels. When working, put the enameled wire between two grinding wheels, and then easily pull the enameled wire out between the grinding wheels, and the paint stripping work is completed. The surfaces of enameled wires and copper wires are smooth after peeling (peeling). This machine can strip 30 wires with a wire diameter of about 0.30 mm, and the supporting products need to keep up while upgrading the machine products. But it should be noted that different manufacturers have different products. It is inevitable that there will be great tension during the operation. The wire diameter is thicker and there are more threads. The next consideration is to cooperate with manufacturers to further improve the supporting fixture. Cooperate with the manufacturer's technicians to develop operational procedures. ?

In addition to the wire wheel, you can also choose a suitable enameled wire stripper. The initial step needs to first level the parallelism between the two wheels. The specific method is: according to the special grid sand size, adjust the gap between the two wheels, start the power supply, and repair the flatness of the two wheels with grid sand. At the same time, the adjusting device should also cooperate. After leveling, the wheels can work. Suitable wire diameter for paint stripping: 0. 1-0.93mm ... Thin wires can be stranded in multiple strands and are widely used for copper (aluminum) wires and copper-clad aluminum wires. After paint removal, the surface is bright, and the copper (aluminum) wire or copper-clad aluminum wire itself is harmless. Users can use it with confidence and boldness according to their own choices.