With the continuous improvement of people's living standards, cars are the most important travel tools for people to travel. When you use it frequently, you will have all kinds of questions. Today, Bian Xiao tells you how to pull out a concave skirt. This question, if a friend is interested, come and share it with Bian Xiao.

The drooping side skirt of a car can be pulled out by a sheet metal machine.

Repair steps of dents on automobile skirts: first, hold the side skirts firmly, then reshape them, then polish them, then putty them, then smooth them, then spray particle glue, and finally paint them. Pay attention to symmetry when drawing.

Generally dents are corrected by sheet metal, which will not cause much damage to the car in theory, but as long as the car structure is deformed, the strength is not as good as the original.

Generally, the cost of repairing side skirts is not very high, and it can be done in 200-300 yuan, but it depends on the sag of the side skirts. If the dent is not obvious, a simple repair is enough. If the dent is obvious, it is recommended to ask professional technicians to repair it, or directly replace the side skirt.

Generally, some technicians will directly cut off skirts with serious depressions. It is suggested that it is best not to cut it, and it can be repaired from the inside as much as possible. If it is difficult to repair, it is recommended that the owner directly replace the skirt.

Draw the whole skirt when you draw it. If you only draw part of the skirt, the color of the skirt will be lost.