1. Jade bracelets are generally polished with oilstone, sandpaper, brush, cleaning and waxing.

2. If jadeite has not been finely processed, it can be polished with polishing powder+small mill (or polished by hand with fine sandpaper). For more delicate jadeite, it is advisable to polish it slowly and carefully by hand. You can also pour the polishing powder into water, stir it into a paste, coat it on the jade surface, and then polish it with leather.

3. Rough polishing of the drum: put the carved jade bracelet and a certain amount of polishing powder into the drum with grindstone and inject a proper amount of water. Different jadeites need different millstones. Repair line: it is necessary to prepare sanding alcohol lamp for repair line.

4. The jadeite bracelet itself can be polished by minimalist polishing, matte polishing and multiple polishing.

How to improve the rough grinding of jade bracelets? What should I do?

If the surface of the jade bracelet becomes rough and no longer smooth, it can be polished to make the jade bracelet glow again. Wipe the jade bracelet with a wet towel first, then evenly apply toothpaste on the jade bracelet and polish it repeatedly 10 minute.

The jade bracelet has a rough surface and can be polished by a professional jewelry store. Put the carved jadeite into a roller with grindstone for rough polishing. Generally, the polishing steps of jade bracelets include rough polishing with rollers, thread trimming, smooth surface trimming and shaping.

Then wash and dry, polish with cowhide, and throw it into the light like other parts.

Minimalist polishing method. After taking it out, apply a proper amount of toothpaste to the bracelet, evenly apply toothpaste to the bracelet with a toothbrush, and polish it repeatedly for about ten minutes. Wash it in warm water, apply a little peanut oil and rub it back and forth with a pair of glasses cloth.

The surface of the jade bracelet is rough and not smooth, so you can find a professional jewelry store to polish it. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping. Put the carved jade into the drum with a grindstone.

Emerald is emerald. If it is worn for a long time, it must be re-polished to fundamentally solve the problem of unsmooth, and it will not take long. It depends on the polishing process of the jade bracelet itself. If it is a soft and polished bracelet, it can be wrapped in fine cotton cloth and rubbed every day to slowly recover the oil.

How is the jade bracelet polished (how is the jade bracelet polished)

Polishing Process Method 1: Soak and smear: Soak jadeite in warm water for unlimited time, take it out and smear a proper amount of toothpaste, the dosage is about the size of a soybean. Repeated grinding: Apply the toothpaste evenly with a toothbrush, and do a whole body SPA for it, and grind it repeatedly for about 10 minutes.

The jadeite bracelet itself can be polished by minimalist polishing, matte polishing and multiple polishing.

Jade bracelets are usually polished with oilstone, sandpaper, brush, cleaning, waxing and blow drying.

Rough polishing of roller: put the carved jade bracelet and a certain amount of polishing powder into the roller with grindstone and inject a proper amount of water. Different jadeites need different millstones. Repair line: it is necessary to prepare sanding alcohol lamp for repair line.

Rough polishing of roller. The grinding of jade bracelets should be done roughly with a roller first. Put the jade bracelet into a roller with grindstone and a certain amount of polishing powder, and add a proper amount of water. It should be noted that different jadeites have different types of grindstones in the drum, which need to be carefully distinguished. Trim the lines.

Passing the oilstone is to polish the jade bracelet with a small oilstone first. If the final carving is rough, use oilstones with different thicknesses to pass through in turn. Blue silk is to polish the surface with a grinding wheel and push it repeatedly.

How to polish the jade bracelet at home?

If jadeite is not finely processed, it can be polished with polishing powder and a small mill (or polished by hand with fine sandpaper). For more delicate jadeite, it is advisable to polish it slowly and carefully by hand. You can also pour the polishing powder into water, stir it into a paste, coat it on the jade surface, and then polish it with leather.

Fine polishing, coating diamond powder on jadeite, and then polishing with hard skin. Cowhide is widely used in China and elephant skin is widely used in Myanmar, so jadeite is polished. Cleaning, the purpose is to clean the residual polishing powder on the polished jade. It is mainly cleaned by ultrasonic machine, and the parts that cannot be cleaned are wiped with alcohol.

Tools: toothbrush, toothpaste, a small dish of peanut oil, glasses cloth, non-slip gloves. First soak the jade bracelet in warm water, take it out and apply a proper amount of toothpaste on the bracelet. The dose is about the size of a edamame. Apply toothpaste evenly to the bracelet with a toothbrush and polish it repeatedly for about ten minutes.

If you re-polish the old bracelet, you should use at least 5000 mesh water sandpaper, which should be used in conjunction with polishing paste with a power of more than 5W. If you want to polish a new bracelet, you should start with 80 mesh water sandpaper and polish it online step by step until it reaches 5000 mesh sandpaper. It will take more than 30 hours for an inexperienced person.

The jadeite bracelet itself can be polished by minimalist polishing, matte polishing and multiple polishing.

Rough polishing of roller: You can put the carved jade bracelet and a certain amount of polishing powder into the roller with grindstone and inject a proper amount of water. Different jadeites need different millstones. Repair line: it is necessary to prepare sanding alcohol lamp for repair line.

How to polish jade bracelets

If jadeite is not finely processed, it can be polished with polishing powder and a small mill (or polished by hand with fine sandpaper). For more delicate jadeite, it is advisable to polish it slowly and carefully by hand. You can also pour the polishing powder into water, stir it into a paste, coat it on the jade surface, and then polish it with leather.

Jade bracelets are usually polished with oilstone, sandpaper, brush, cleaning, waxing and blow drying.

The jadeite bracelet itself can be polished by minimalist polishing, matte polishing and multiple polishing.

Rough polishing of roller: put the carved jade bracelet and a certain amount of polishing powder into the roller with grindstone and inject a proper amount of water. Different jadeites need different millstones. Repair line: it is necessary to prepare sanding alcohol lamp for repair line.

Polishing the surface of a jade bracelet requires pasting and pushing. Apply a layer of paste polishing powder to the surface of the jade bracelet and polish the surface with a 2000-mesh grinding wheel, and then repeat the first two steps, usually twice. Brush and seiko, coat the surface of jadeite with polishing powder and then throw it with a hard brush.

How to polish the jade bracelet?

The jadeite bracelet itself can be polished by minimalist polishing, matte polishing and multiple polishing.

If jadeite is not finely processed, it can be polished with polishing powder and a small mill (or polished by hand with fine sandpaper). For more delicate jadeite, it is advisable to polish it slowly and carefully by hand. You can also pour the polishing powder into water, stir it into a paste, coat it on the jade surface, and then polish it with leather.

Jade bracelets are usually polished with oilstone, sandpaper, brush, cleaning, waxing and blow drying.

Polishing the surface of a jade bracelet requires pasting and pushing. Apply a layer of paste polishing powder to the surface of the jade bracelet and polish the surface with a 2000-mesh grinding wheel, and then repeat the first two steps, usually twice. Brush and seiko, coat the surface of jadeite with polishing powder and then throw it with a hard brush.

Rough polishing of roller. The grinding of jade bracelets should be done roughly with a roller first. Put the jade bracelet into a roller with grindstone and a certain amount of polishing powder, and add a proper amount of water. It should be noted that different jadeites have different types of grindstones in the drum, which need to be carefully distinguished. Trim the lines.

Rough polishing of roller: You can put the carved jade bracelet and a certain amount of polishing powder into the roller with grindstone and inject a proper amount of water. Different jadeites need different millstones. Repair line: it is necessary to prepare sanding alcohol lamp for repair line.