1, winding method.
This method is also a more traditional method. The older generation can often see that the problem can be solved by winding a thin red rope (or other thin rope) on the side or palm of the ring and winding a line with a corresponding thickness according to the size of the gap between the ring and the finger. Silver rings can be wrapped with white or gray thread, and gold rings can be wrapped with thin brown or yellow thread.
2. Adhesive tape method.
When the ring of your favorite style is relatively large, you can cut out the transparent tape about the width of the ring and stick it inside the ring. Some people will use plastic wrap instead of tape, and the effect is the same. This can solve the problem without affecting the beauty of the ring.
3. Washer method.
The washer method is to make a washer with precious metal of the same material as the ring, and then embed the washer on the inner wall of the ring to reduce the size of the dead ring without damaging it.
4. Storage resizing method
If you don't want the ring to be wrapped around the wire and don't want to put tape on it, then the safest and most reassuring way is to take the ring to a specialty store for processing and make it smaller. It may cost you a little money, but your beloved ring can be restored to its original beauty and fit your finger perfectly. Why not?