How to adjust the clearance of the new Santana gear lever first needs to separate the dust cover of the gear lever from the center console. There are two small holes in the gear shifting mechanism seat, which need to be fixed with a screwdriver, so as to adjust the gear shifting mechanism. There is a gap in the shift lever cable of the car, which is caused by the owner not stepping on the clutch every time he shifts gears, so there will be a certain gap. The gap between gear levers is very small, and the adjustment distance is very limited. Pay attention to adjustment and make appropriate adjustments. Because the manual transmission models are all designed in five gears, it is only necessary to adjust the five gears when adjusting. The gear of the car was hard at first, because the gear of the new car was not well run-in, so it was difficult to operate. If the gear of the car is not easy to engage, or the gear is scratched when driving at low speed, it is necessary to adjust the gear of the car at this time. It is not easy to shift gears when starting automatically, and all gears are easy to shift gears after flameout. When this happens, I need to adjust the gears. The clutch is too high or too low for me to adapt. This is because the clutch clearance is too large and the clutch position is too high. After adjusting the gap between the gear levers, a test is required. If the car runs normally, the adjustment is accurate.