Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - The ceramic washbasin is broken, how to repair it?
The ceramic washbasin is broken, how to repair it?
\x0d\ x0d \ II。 Ceramic metal mending agent (enamel reactor mending agent): \ x0d \ Ceramic metal glass lining mending agent glass lining reactor mending agent (Jin Sucheng) JS9 16 is a polymer alloy mending agent, which is mainly used for repairing local damage of glass lining equipment and its parts. The repairing agent for enamel reactor is not only characterized by high wear resistance and corrosion resistance, but also has the ability of rapid repair. The repair agent for enamel reaction kettle can quickly repair the damaged equipment at room temperature without interrupting the production line. The mending agent for enamel reaction kettle is magnetic, but it is not conductive, and the maximum service temperature can reach 230℃. \x0d\ III。 Repair technology of ceramic metal \x0d\ This repair agent is easy to use and mainly follows the following five steps: \x0d\ 1. Use surface treatment to remove the deposits on the damaged parts, polish the parts to be repaired with an angle grinder or a straight handle grinder on the principle of "the rougher the better", and finally clean and degrease the parts with acetone or alcohol (hands are not allowed). \x0d\ 2。 Ingredients: pour the base material and curing agent on the working plate in proportion, and mix them fully and evenly to become dark rubber compound. \x0d\ 3。 Coating (1) Evenly coat the prepared rubber compound on the surface of the repair part with a rubber compound scraper, scrape off all bubbles, ensure that the surface is in close contact with the repairing agent, and cure at 20-30℃ for 2 hours. \x0d\ 4。 When curing at 20-30℃, it can be processed for 3-5 hours, and it takes more than 24 hours to completely cure. The higher the coating thickness and temperature, the shorter the curing time. \x0d\ 5。 You can check the curing effect by listening to the tapping sound. Used tools should be cleaned with detergent immediately. The application of \x0d\ ceramic metal repairing agent in reactors, tower sections and other equipment has achieved good results. Its simple and practical performance not only saves a lot of manpower and material resources for your company, but also brings considerable economic benefits.