2. Then prepare a stupa.

3. After the gourd mouth is decorated, cut the playing rope into the length you like, pass through the round hole on the stupa, tie the knot and put it into the stupa.

4. Then there is glue. It should be noted here that when the glue gourd is under the stupa, you can drop a drop of glue to the mouth of the gourd and stick it together, and then stick it outside.

5. Finally, it is necessary to handle the hand-twisted gourd faucet.

Extended data:

First, the maintenance of the faucet also makes it stronger. You can apply 502 glue, or you can use transparent nail polish, latex paint and varnish. The principle is that it will harden after drying, so the faucet is relatively difficult to break.

Some faucets are soft and brittle (because they are now planted in pursuit of output and small size, but they are much softer, and some will be moldy when put together). After you finish the faucet, put glue on it.

When painting, you should turn the gourd upside down slightly (the faucet is slightly downward), and draw a few drops from the side of the neck, depending on the thickness of the faucet. Be careful not to use too much at first, let it flow naturally and penetrate, and don't brush it deliberately. You can also apply several layers like this after you want to tighten it.

The second is the shaping of the faucet. The vines of many gourds bend too much, and some bend below the neck, which seriously affects the play. There are two main ways to achieve plastic surgery. One is foaming, which is deformed when it is soft, and then wrapped with thin wires or copper wires. The second kind is soaked in sesame oil, which can be bent at will when it is soft.