First, open the cover and remove the bumper screws and clips on the cover. Use a 10cm wrench to remove the screws and clips on the bumper edges of the left and right front wheels. Then take off the clip at the bottom, tilt the center of the clip with a sharp screwdriver, and then pull it out to take it off. Some also have screws, which are basically Torx screws or screws of 10cm wrench. Remove them with tools.
It is believed that the basic screws and clips should be removed and slowly mixed by hand at the side. If you can't move it, remember to move it hard and see if there are any screws left in the gap. After all, the situation of each car is different.
As follows:
1, the first step is to open the hood, confirm the headlight mounting screws, and then remove the bumper screws and clips on the hood.
2. Step 2: Find a 10cm wrench and use it to remove the screws and clips on the bumper edges of the left and right front wheels of the car.
Step 3: Lift the center of the clip under the car with a sharp screwdriver and pull it outward, so that the clip under the car will be removed.
4. Step 4: At this time, if any missing screws are not removed, remove them all (mostly Torx screws or screws removed with a 10cm wrench).
5. Step 5: Remove the basic screws and clips (check whether the screws are still missing in the gap), then slowly stir by hand at the side of the car, and then the bumper will be removed!