Perforated installation expansion tube
Punch holes at the marks with an impact drill and install the expansion tube.
Install the hook and the post holder.
Install the hook and the post holder. When installing the hook, be careful not to tighten the fixing screw too tightly. You can try to hang it lightly, and then insert a metal sheet according to the vertical position between the column basin and the wall for debugging. If it is necessary to tilt upward, insert the metal sheet in the upper position, and if it is necessary to tilt downward, insert the metal sheet in the lower position. Then, install the hook firmly.
Connect the inlet pipe fittings and the drain pipe fittings.
Start connecting the inlet pipe fittings and the drain pipe fittings. Tips: according to the different drainage pipes, it is best to choose the drainage pipe. Then connect the upright post with the fixing piece.
Matters needing attention
According to the requirements and steps in the instruction manual of the birdbath, first install the birdbath on the hook. Then install the washbasin device. If metal fittings are selected for fixing, you can put on the metal fittings of the fixture, and then drive the fixing bolts into the screw mounting holes (note: please fasten the fixing metal fittings on the lower end face of the fixing holes). If the friend is directly fixed in the ceramic hole, install the fixing bolt from the ceramic hole after fitting the gasket.
Anti-mildew work
It is very important to prevent mildew, otherwise it will be moldy if used for a long time, which will affect beauty and health. The contact surface between the column foot and the upper mouth of the column basin, the wall and the ground can be sealed with mildew-proof silica gel.