Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - 57 mold technical questions and answers
57 mold technical questions and answers
57 mold technical questions and answers

In order to help you understand more clearly what mold technology is, below, I will provide you with 57 questions and answers about mold technology, hoping to help you!

1. What is a pillow?

There is often a gap on the edge of the plastic part of the shell for installing various accessories. The pillow-shaped parting part formed here is called pillow position.

2. What is a crater?

The shape of the root of BOOS column reflected in mold is called mold crater after volcanic eruption.

3. What does this mean?

Oh, it refers to the core, a Hong Kong idiom.

4. What is a tiger's mouth?

The tiger's mouth is also called: pipe position, that is, the part used for limiting.

5. What is ranking?

The product layout on the mold is called ranking.

6. What is the glue position?

The cavity of the product on the mold is called the glue position.

7. What is the bone position?

The tendon on the product is called bone position.

8. What is a PL surface?

PL surface, also known as parting surface and Lamian Noodles, refers to the part where the front die and the back die contact when clamping.

9. What is touching and puncturing?

The mating surface of the male die and female die parallel to the PL plane is called the contact surface, and the mating surface of the male die and female die not parallel to the PL plane is called the insertion surface.

10. What does sliver have to do with silk?

Stripe and silk are both units of length. Stripe 1 =0.0 1mm in Taiwan Province Province and silk 1 =0.0 1mm in Hong Kong, so 1 = 1.

1 1. What is the PL plane?

PL surface, also known as parting surface and Lamian Noodles, refers to the part where the front die and the back die contact when clamping.

12. What is touching and puncturing?

The mating surface of the male die and female die parallel to the PL plane is called the contact surface, and the mating surface of the male die and female die not parallel to the PL plane is called the insertion surface.

13. What does sliver have to do with silk?

Stripe and silk are both units of length. Stripe 1 =0.0 1mm in Taiwan Province Province and silk 1 =0.0 1mm in Hong Kong, so 1 = 1.

What is the column position?

The column of BOSS on the product is called column position.

15. What is a virtual location?

The gap in the mold is called a virtual position.

16. What is the buckle position?

The hook used for connection on the product is called the buckle position.

What is the fire pattern?

The pattern left after EDM is called fire pattern.

15. What is a copper worker?

EDM usually uses easy-to-process copper material as discharge electrode, which is called copper worker, also known as electrode. Copper workers are generally divided into rough workers, rough young workers, young workers and young workers, also known as Seiko.

18. What is the spark position?

In the process of discharge, the discharge gap between copper workers and steel materials is called spark potential, and the spark potential of rough workers is generally 15 to 50, and that of young workers is generally 5 to 15.

19. What is the material level?

Avoid the thickness of plastic products, also known as thick meat.

20. What is the original body?

The retain force of that original body is relative to the cutting insert. Original body retention means that the whole piece of steel is a processing blank and is processed together during processing.

2 1. What are the welding marks?

The line formed when two strands of plastic meet is called weld mark.

22. What is a jet plane?

After the plastic enters the cavity from the glue inlet, it forms a serpentine flow mark, which is called jet.

23. What does DME mean and what does HASCO mean?

The standard of standard parts, DME is made in America and HASCO is made in Europe.

24. What is reverse buckle?

Parts of products that cannot be directly demoulded by the front and rear molds become inverted.

25. What is foolproof?

Anti-stupidity is an idiom, which means to prevent a very simple mistake and daze! For example, an insert has a hanging table with the same size on one side of the world. It is likely that the world will be upside down when assembling on site, but he makes a hanging table on the other side of the insert. At this time, if heaven and earth are installed backwards, it will not fit in, and it is impossible to install it wrong. This action to prevent mistakes caused by a daze becomes a daze.

26. What is a die-cutting machine?

Die-cutting machine is a local idiom, which is what we often call injection molding machine and molding machine.

27. What is stop?

Sewing is sewing line, also called covering line.

28. What is a flight model?

Whether the flying die is a matching die or a standard die.

29. What is a laser scalpel?

The action of numerical control finishing is called light knife, which is to process in place on the basis of rough machining.

30. What is opening a box?

The action of machining the position of the die core on the die blank is called frame opening.

What do you mean by 3 1. Reverse?

The method of reversing the material surface of the front and rear molds under normal circumstances is called inversion.

32. What is floating?

The method of ejecting the mold with a small insert in the place where there is local back buckle is called floating.

3 1. What do you mean by eating the front mold?

When the mold is opened, the product stays in the front mold, which is called eating the front mold.

33. What is top white?

The die force required for ejection is large, and the ejector pin is not strong enough, which causes local damage to the product. From the front of the product, there is obvious white as the top white, also called the top high nozzle.

34. What is baking?

When diving, the marks left by the water entry point on the outer surface of the point are called baking marks.

35. What is code boy?

The fixture belongs to a clamping tool, which is a cushion block with a triangular inclined opening groove.

36. What is excessive cutting?

Overcutting refers to excessive cutting, that is, when machining a workpiece, the parts that do not need to be machined are also machined. Excessive cutting is not good.

37. What is a school cup?

The front die bounces out of position in the open die.

38. What is a tooth click?

Pat. Tapping a thread is called clicking.

39. When do you need to make a two-color mold?

When a product contains two different materials or different colors of the same material, a two-color mold is designed for molding.

40. What is the mold design process of the factory?

Customers provide product drawings? Analyze products? Confirm the plastic variety? Confirm the mold material? Turn to engineering drawing? Take shrinkage as a mirror? Perfect the assembly drawing? Book a phantom? Ordering mold cores? Pull out the mold? 3D parting? Determine runner/gate mode? Structural design reference ranking chart? Remove the insert? Correct 3D? Engineering drawing "includes: mold core/insert/mold blank/part"? Make a BOM? Proofreading and auditing.

4 1. How many ways are there to demould?

Shun detachment and forced detachment.

42. What are the glue injection methods?

Put it directly in the glue? Grinding glue? Side glue? Ring glue? Film adhesive? Latent? Click on the glue? Croissant feed? Fan-shaped glue feeding.

43. What is the slope of the slider and the slope of the inclined guide post?

The slope of the slider is generally 20 degrees, and the slope of the inclined guide pillar is generally 18 degrees.

44. Is the cold material good?

The function of the cold material well is to store a small part of plastic material with low temperature that enters the mold first.

45. What is the function of the locating ring?

The function of the positioning ring is to ensure the correct relative position between the mold and the injection machine.

45. What is the relative position of cooperation?

There are three types of fit: clearance fit, transition fit and interference fit.

46. What is the function of the insert?

Easy to process, prevent carbon deposition, benefit polishing, save materials, help exhaust, facilitate replacement, and reduce processing machines.

47. What is the gating system?

The plastic flow channel from the injection nozzle to the cavity is called gating system, which includes: main channel, shunt channel, gate and cold well.

48. What is reverse engineering?

Reverse engineering is to scan the existing samples or models accurately and at high speed with a high-speed 3D laser scanner, and get their 3D contour data. With the help of reverse engineering software, we can reconstruct the surface, analyze the online accuracy of the reconstructed surface, evaluate the construction effect, and finally generate IGES or STL data, which can be used for rapid prototyping or NC machining.

56. What are the common defects of plastic parts?

Lack of glue? A cloak? Bubbles? Shrinkage? Welding marks? Black spots? Stripes? Tilt up? Hierarchy? shed a skin

50. What material is used for high mirror polishing?

Commonly used high hardness heat-treated steels, such as SKD6 1, 8407, S 136.

5 1. What are the hardness indexes?

Hardness indicates the ability of a material to resist hard objects pressing into its surface. Commonly used hardness indexes include Brinell hardness, Rockwell hardness and Vickers hardness.

52. What's the difference between the first angle method and the third angle method?

The first angle drawing method: the left view is placed on the right, the right view is placed on the left, the top view is placed below, and so on;

The third drawing method: the left view is placed on the left, the right view is placed on the right, the top view is placed on it, and so on.

53. What is the basic principle of the three views?

The basic principles of the three views are: long alignment, high alignment and equal width.

54. What are the ways to transport water?

Commonly used water delivery methods are: straight-through, round, water tower and spiral.

55. What is the overflow value?

Overflow value refers to the gap where plastic products will overflow (that is, flash). The overflow value of ABS is 0.04 mm, PC is 0.06 mm, PA is 0.0 15mm, POM is 0.04 mm, and the overflow value of PBT+ 15 mm..PBT+30% is: 002mm, PMMA is: 0.065mm, PVC is: 0.07 mm. ..

56. What is elastic deformation? What is plastic deformation?

Objects will deform under the action of external forces. When the external force disappears, the deformation of the object before deformation is called elastic deformation, and when the external force disappears, the deformation of the object before deformation is called plastic deformation.

57. What is the function of carrying water?

The function of water delivery is to control the temperature in the mold core.

;