1. Select the Show and Hide tab in the editing options, and then click the Show and Hide function to ensure that all the objects to be converted are displayed.
2. After that, we select the option to export the part by selecting the file tab.
3. Select "New", click "Specify Component", browse and select the location and file name of the file to be exported (Chinese characters are not allowed in folders and file names).
4. Select all objects, click Class Selection, and then select the left and right entities or slice structures to export.
5. Click Delete Parameter and copy the referenced object, and then confirm. After the export is completed, open the file in the folder where you saved it. At this point, you can delete all the original assembly files.
2. How to convert all assembly parts of UG into working parts?
Taking ug8.0 as an example, open the assembly file, file, export and part, pop up the window of exporting parts, set parameters, and generate a new part after the export is completed. When you open a new part, you can see that there is only one part in the assembly navigator, and there is no assembly and assembly relationship. Describe the main parameters of the exported parts window: 1, and part specifications: check the specified export location, and you can choose "New" or "Existing"; New, click on the designated part, you can specify the export location and the name of the new part; For the existing parts, click the specified part, and you can "select the loaded part" name, and the exported new parts will be in the same path; 2. Object selection range: "Only working parts" and "All objects" can be selected; Only working parts, actually select a single part, that is, the working part currently set in the assembly file; For all objects, click Class Selection to open the Class Selection window, which usually uses Select All. In the drawing area, you can see that the wireframes of all components are highlighted and prompted to choose. 3. Highlight selection: the general default setting is enough; 4. Feature parameters: There are three options, namely, removing parameters, retaining internal parameters and retaining all parameters; Select and remove parameters, and the new part will be exported. Under the Part Navigator, there are only parts and no modeling features. Keep the internal parameters and all parameters, and there is little difference between them. The exported new part has modeling features in the Part Navigator. Double-click the feature to edit the feature parameters. 5. Expression delivery method: generally, the default setting is enough; .
3. How about 3.UG assembly? Several parts are set as working parts.
If designing a fixture: create a new assembly, insert a three-dimensional figure of the part in the assembly, and then insert a new part (that is, the fixture you want to draw). Select the mating surface, convert the sketch obtained from the solid reference on the surface, then draw the blank, and then save this part (preferably externally). Edit the new part (fixture) on the assembly to punch holes, or use the special-shaped hole guide to punch holes.
In the same way, establish all tooling parts, install all screws with smart fasteners, select parts materials, and then click File to generate engineering source drawings from parts drawings. Mark the dimensional tolerance in the engineering drawing and give it to the supplier, or use solidcam to select your CNC category (tool category of several axes), and directly generate G code and input it into CNC for direct processing (note that rough milling and fine milling can save time).
If you make molds: Use the mold toolbar described above.
4. How to use assembly in UG
Original publisher: chlgmabd
Gather around Li Hongying? Constrained components–alignment–angle–symmetry? Waveform Geometry Connector–Create a new blank file and add components. And becomes the current working part. –Adds a new component to the current assembly to make it a working part. Then, a tablet is generated and thickened to obtain a solid. ? Report assembly information:–-Assembly-& gt；; ; Report–right-click in the assembly guide to export to EXCEL or IE browser. Deformation assembly _ English film operation? Precondition of deformable component-Define deformable component: that is, define a component as deformable and set corresponding parameters. –Deformable assembly, in which the shape of deformable parts is changed according to certain requirements. ? Defining a Deformable Part–Steps:? Tools-> Definedeformablepart-–Definition: Defines the name of the part. -feature: deformation feature-expression:? Bywholenumberrange: specify an integer range? BYnumberrange: Can you specify a range of numbers with decimals? Option: Choose from several given numbers. -References:Reference-summaryt:: Abstract Take the hose as an example:? Define deformed components:–First, constrain the inner diameter and outer diameter of the hose with expressions. —When defined, this feature only selects pipes. Select a guide line by reference. Expressions only use input values that can be changed. Some families? In the processing and design of mechanical products, parts are serialized and generalized to varying degrees. Such as screws, nuts, etc. Repeated creation of these parts with the same shape and only some different parameters will consume too much energy and make the product database huge and difficult to manage. To solve this problem, we can use component families to manage it. Convenient and quick. ? Create part family template text