The new frame with lenses is not necessarily the right shape. It needs to be polished again, and the effect is not very good.
So just fix it. Step removal:
1. Prepare 1 bottle of 502 glue, 1 glass pad, several napkins, 1 disposable plastic gloves, 1 wet cloth rag, 1 paper cutter, 1 bottle of alcohol disinfectant.
Put on gloves first, especially, you must put on gloves first, otherwise it will be too late to regret.
3. Poke 502 glue with a needle. Note: Other objects must be placed on the periphery of the glass plate. Don't pinch the bottle hard to prevent the glue from splashing out of control!
4. Turn the mirror frame upside down and put the temples on the glass plate. This position is the safest.
5. Drop a few drops of glue in the concave seam of the mirror frame on both sides of the fracture, then quickly install the lens and sew it around.
6. Hold the lens with your left hand, butt the broken part of the mirror frame and press it together with the lens. Drop a few drops of glue with your right hand on the damaged part and both sides of the frame. After compaction 1 min, let stand. Probably wait until the glue is completely dry before picking it up and wiping it.
It should be noted that: 1 This kind of fracture is useless if it is repaired by a small fracture alone. Therefore, we can't repair the frame first and then install the lenses, so we can only stick the lenses together in the frame.
2. In case of glue splashing, it should be quickly absorbed with a napkin, not directly wiped, and then quickly wiped with a wet rag.
3. After the repair, there will be glue overflow around the border. Carefully scrape it off with a paper cutter, wipe it with alcohol and scrape it off with your nails.
4. If the glue pollutes the lens and it is blurred after wiping, don't regret throwing it away! The camera can be saved! Spray it with disinfectant alcohol several times, scrape off the pollution patiently with your nails, and repeat it several times under the light!