Excimer laser is a common skin beauty technology, and excimer skin sensitive plate is an auxiliary tool for excimer laser treatment. The bending process of excimer skin sensitive plate is as follows:

1. Preparation: Prepare the required excimer skin sensitive plates, bending machines, measuring tools, knives, etc.

2. Measurement: Measure the length and width of the excimer skin sensitive plate to be bent with a measuring tool to determine the required bending radius and angle.

3. Cutting: according to the measured size, use a cutting tool to cut the excimer skin sensitive plate into the required shape.

4. Bending: put the cut excimer skin sensitive plate into a bending machine and bend it according to the required bending radius and angle.

5. Shaping: Shaping the curved excimer skin sensitive plate to make it conform to the curve of the treatment site.

6. Cleaning: Clean the curved excimer skin sensitive plate to ensure that its surface is clean and dust-free.

The above are the detailed steps of the bending process of excimer skin sensitive plate. It should be noted that the operating environment should be kept clean and tidy during the whole process to avoid polluting the excimer skin sensor board. At the same time, we should pay attention to control the strength and angle in the bending process to avoid damage to the sensitive plate of excimer skin.