Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - Knife piercing method of mink fur collar
Knife piercing method of mink fur collar
There are two ways to pierce mink fur collar: ordinary piercing and oblique piercing;

1, ordinary knife piercing

Cut the skin piece into the shape of "human" and "inverted human" on the table, then adjust the angle and sew it, and you can reach the width and length you want.

Generally, when making mink clothes, the cutting width of mink hide is about 5MM, while when making fox fur clothes and raccoon hair clothes, the cutting width of fox fur is about 1CM.

If we are American sable, besides the benefits of increasing the length and width of leather, sable clothes will show intermittent hairlines in different directions after hair-shedding treatment, resulting in light and shade effects.

2. Diagonal perforation

Cut the fur on the table to a certain angle, cut it into 5MM wide Mao Mao diagonal strips, and then sew it on the wagon machine, so that the center line of the cut piece will be a little bent.

The advantage of this method is that fewer stitches are used when turning the leather, which can effectively reduce the tension of the stitches on the leather surface, make the fur surface of the leather coat very uniform, make the lines smoother and reduce the cost of raw materials. This is often used to cut light-colored clothes.

Cleaning and maintenance methods of mink fur collar

1. When it is slightly soiled, first pour the neutral detergent into warm water at about 30℃, put it into clothes after the detergent is evenly mixed, and pat it gently with your hands. If mink products are stained with dyes, they should be sent to dry cleaners for special treatment and washing.

2. Wash it with warm water of about 40℃ for several times until it is clean. Add a little vinegar or softener to clean water. It is best to put the washed mink sweater collar into a cloth bag and put it in the washing machine for dehydration 1-2 minutes.

3. Smooth the mink sweater collar and iron it with a steam iron at 120℃- 140℃. The iron can't directly touch the collar of mink sweater. The mink sweater collar can be flattened and dried after it is shaped.