The feeding range of impact crusher is 300-800 mm, which can handle brittle materials and high hardness materials. Because the feeding trough and counting plate of the counting plate can be equipped with heating devices, the counting plate can also handle materials with high water content, which is mainly used for processing materials that often need to be moved, such as metallurgy, chemical industry, building materials, hydropower and so on. , especially suitable for highway, railway, hydropower and other debris flow operations.

Principle of impact crusher: impact crusher uses impact energy to meet the template requirements of broken materials. When the machine works, it is driven by the motor and the rotor rotates at high speed. When the material enters the action area of the plate hammer, it collides with the plate hammer on the rotor and is broken, then it is thrown into the impact device again, and then bounces from the impact liner to the action area of the plate hammer and is broken again. This process is repeated, and the material is broken into 1, 2, and 3 impact chambers in turn from large to small until the material is broken into the required particle size. Discharge through the outlet.

Performance advantages of impact crusher: 1, convenient and flexible adjustment of discharge size and wide adjustment range.

The impact crusher can adjust the discharge particle size by adjusting the rotor speed and the gap between the impact plate and the crushing chamber. Clearance adjustment can be done by mechanical or hydraulic means. The hydraulic control system can easily adjust the clearance through the local operation of the button or remote control system.

2. Wearable parts wear less, and the metal utilization rate is high.

The hammer wear of impact crusher only occurs on the side facing the material. When the rotor speed is normal, stones will fall on the surface (striking surface) of the hammer, and the side and back of the hammer are not easy to wear. Even on this side in contact with the stone, the wear is very small. And the bottom grinding rod is easy to replace, so the metal utilization rate of the impact crusher plate hammer is as high as 45%-48%.

3. The replacement of spare parts of impact crusher is simple, and the maintenance cost is reduced.

Only six plate hammers are installed on the rotor of impact crusher. The plate hammer can be easily replaced with a designed special tool. It only takes one shift to replace a set of plate hammers.

The purpose, principle and performance advantages of impact crusher are introduced above. If the above answers are useful to you, please encourage me to praise me so that I can help more people. Thank you!