So how to install the bag filter? Here is a graphic introduction for users' reference.
1. Before installation, put the bag cage into the cloth bag to see if the cloth bag is suitable.
2. Clean up the materials on the flower board, clean and tidy, and there is no material.
3. Install pedals in the bag to ensure that two people work in the bag filter at the same time.
4. When the bag of the bag filter is put into the bag cage, it shall not be forcibly inserted to prevent blockage and damage to the bag.
5. Be careful when installing the cloth bag. Do not let the cloth bag collide or scrape with sharp objects. Even a small scratch will greatly shorten the life of the bag. The correct installation method of the cloth bag is to put the cloth bag into the room from the hole of the box, and then pinch the spring on the upper part of the cloth bag into a concave shape and put it into the hole of the box to reset the spring ring. Finally, gently insert the bag cage from the mouth of the bag until the protective cover on the upper part of the bag cage really presses on the hole of the box. In order to prevent the bags from being trampled, it is required to install a bag cage for each bag.
6. The installation sequence is from two sides to the middle and from top to bottom.
7. Install a 5*5mm tetrafluoroethylene sealing belt at the mouth of the bag filter, and fix it on the ceiling after gluing. If there is deviation or falling off, it needs to be reinstalled. Whether to add tetrafluoroethylene sealing tape will be decided according to the field situation.
8. After the pressure plate is fixed, lock it with layering.
9. Install the blowing pipe, and the blowing port must face the bag mouth.
10. Blowpipe should be installed above the dust bag of each row of bag filter. During installation, the blowpipe should be positioned with the attached blowpipe positioning die based on the bag, so that the blowhole of the blowpipe is aligned with the center of the bag. Each blowpipe is connected with the external air bag through a steel joint close to the dust collection chamber frame, and the other end of the blowpipe is fixed on the clamping bracket. After the blowpipe is fixed, the lower blowhole of the blowpipe should be coaxial with the dust bag and venturi.
165438+
In short, the holes on the ceiling should be evenly arranged, and the dust removal skeleton and dust removal bag should be evenly spread on the ceiling. Pay attention to the installation of dust removal bone and dust removal bag, which must be firmly installed and sealed, without air leakage and dust cleaning, so as to improve the utilization rate of dust removal bone and dust removal bag.