According to the provisions of vehicle appearance inspection in motor vehicle safety technical inspection items and methods:

Body appearance shall meet the following requirements:

1, bumper, rearview mirror, rearview mirror and other parts should be in good condition;

2, the windshield should be complete, the driver's field of vision should be no crack, damage, all the windshield should not stick a mirror reflection sunshade film;

3, the car body should be geometric, and the height difference between the left and right symmetrical parts of the car body outer edge should comply with the relevant provisions of GB7258;

4. There must be no obvious specular reflection on the outside of the car body, no contact with parts of traffic participants such as pedestrians and cyclists, and no sharp corners and sharp edges that may cause harm;

5. The car body (carriage) and its paint surface shall be free from obvious corrosion and damage;

6, spraying, pasting logo or body advertising should not affect safe driving.

Extended data

Items and methods of motor vehicle safety technical inspection: vehicle uniqueness

1, license plate number/model, vehicle brand/model.

(1) When registering for inspection, the brand/model of the motor vehicle submitted for inspection shall be consistent with the factory certificate of the motor vehicle (the imported car is the import certificate of customs goods).

(2) When a motor vehicle is used for inspection, the license plate number/model and brand/model of the motor vehicle submitted for inspection shall be consistent with the contents of the endorsement of the motor vehicle driving license.

2. Vehicle identification code (or vehicle factory number)

(1) At the time of registration and inspection, the vehicle identification code (or vehicle factory number) of the motor vehicle submitted for inspection shall be consistent with the rubbing film of the vehicle factory certificate (the imported vehicle is the customs import certificate) and the vehicle identification code (or vehicle factory number), and the content and composition of the vehicle identification code shall conform to the relevant provisions of GB 16735.

The carving position, depth and the height of letters and numbers shall comply with the relevant provisions of GB7258, and shall not be chiseled, repaired, polished or re-carved without authorization.

Passenger cars and trucks (except low-speed cars) that were delivered on March 20 13 1 day should clearly read the vehicle identification code near the windshield pillar from the outside. The contents of all vehicle identification codes marked on the vehicle shall be consistent.

(II) When using motor vehicles for inspection, the vehicle identification code (or vehicle factory number) of the motor vehicle submitted for inspection shall be consistent with the contents of the endorsement of the motor vehicle driving license, and there shall be no unauthorized chiseling, repairing, polishing or re-engraving.

3. Engine number (or motor number)

(1) When registering for inspection, the motor vehicle engine number (or motor number) submitted for inspection shall be consistent with the motor vehicle factory certificate (the imported car is the customs import certificate) and conform to the relevant provisions of GB7258.

(2) When a motor vehicle is used for inspection, the engine number (or motor number) of the motor vehicle submitted for inspection shall be consistent with the contents of the endorsement of the motor vehicle driving license.

4, vehicle color and appearance

(1) When registering for inspection, the appearance of the motor vehicle submitted for inspection shall be consistent with the announcement photos of motor vehicle products.

(2) When the motor vehicle is used for inspection, the vehicle color and appearance of the motor vehicle submitted for inspection shall be consistent with the vehicle photos on the motor vehicle driving license, and there shall be no circumstances such as changing the color of the vehicle body, changing the shape of the carriage or changing the vehicle structure.

Chenzhou Public Security Bureau-Items and Methods of Motor Vehicle Safety Technical Inspection