Supplementary question: I don't want to take the route, how to do it! Be specific! thank you
Questioner: Lin Kaixiang-the first time to enter the second level of Jianghu.
Reply *** 45
path
Respondent: Lan Assistant Level 2 4- 16 0 1:05.
First, you need two network cards to install the driver. The second step is to ensure that the network cable is made correctly. The third step is setup, (Start-Setup-Open Network Connection-Click New Connection under Network Task-Next-Set Advanced Connection-Select Direct Connection to Other Computers-Next-Select Host or Guest in the Host-Guest dialog box. Note, if this is set as the host, the other must be the guest-Next-Select your user, if there is no user you want in the option, please add it yourself-
References:
Crhj- probationary period level 1 4- 16 09:22
Each machine has a network card, and then the network cable should remember that the connection mode is 1326, and then each machine should fill in the IP and subnet.
For example: an IP:192.168.0.1.
Gateway: 192. 168.0.6438+0.
Subnet: 255.255.255.0
Two IPS:192.168.0.2.
Gateway: 192. 168.0.6438+0.
Subnet: 255.255.255.0
Okay, that's okay.
Interviewee: Anonymous 4- 16 09:40
If it is a simple dual-computer connection, just find someone to do it directly.
If you want two computers to surf the Internet at the same time, you can set up an agent after the two computers are connected. However, if the computer acting as an agent is not turned on, another computer cannot be connected.
If you want two computers to surf the internet without affecting each other, you can only use a router! !
Interviewee: GSL cn- trainee magician level 3 4- 16 09:42
If you use USB ADSL equipment to surf the Internet, connect two computers with network cable (reverse connection) and set it up.
If you use ADSL cat or optical fiber with network card to go directly to your home, you need to add a network card to at least one of the computers.
Both of the above methods need another software, such as SAGATE, to complete the setting of two computers surfing the Internet at the same time.
The specific setting method is very simple. The IP of the server is 192. 168.1.The IP of the client is192.168.1.2, and the IP of DNS is/kloc. Then the gateway is also set to 192. 168. 1. Finally, it is best to ensure that the names of the two computer workgroups are the same. Sagate settings do the same. Just follow the software prompts and PING each other.
Either way, there is one of the biggest disadvantages, that is, if you want to use the computer as a client to surf the Internet, you must turn on the computer as a server at the same time.
I suggest you buy a router. .....
Respondent: Assistant Tuzi Qizi, Grade 2 4- 16 09:57
Do you surf the Internet? If you want to route the internet, buy a network card and connect it with a two-wire line, and it's almost there, hehe! Good luck!
Answer: Beginner Tiger-Trainee Magician Level 2 4- 16 10:2 1
I bought the route and they installed it for you for free. I'm not kidding you.
Interviewee: jmy 37 1980463- assistant level 3 4-16141.
Go to the place where the line is sold and tell him to answer it directly
Go back and connect two computers.
good
You're right, but you can't get online. But also set the IP address, which should be in the same network segment. Write casually, as long as the top three are the same. The subnet mask is the same.
Tell you the address:
The first set:192.168.1.2, with the mask of 255.255.255.0.
There is another one:192.168.1.3 with a mask of 255.255.255.0.
Gateway: 192. 168. 1.
Responder: people with sealed ID-Manager level 5 4- 16 10:5 1.
Purchase connection
Respondent: dslj 123- probationary period level 1 4- 16 1 1:25.
Buy a route and plug in the network cable.
Respondent: liying 98- assistant level 2 4- 16 12:24
Generally speaking, LAN is a special computer network in the same company, the same school or within a few kilometers. It uses communication lines to connect multiple computers in a small area to achieve the purpose of data communication and resource sharing.
In LAN, the main technical factors that determine its characteristics are: network topology, transmission medium and media access control method.
(A) the network topology
It can be divided into four types: star, bus, ring and tree. As shown in the figure below:
Zuo Ye/Pictures/Top. JPG
In recent years, star structure has been widely used because of the emergence of hubs and the extensive use of twisted-pair cables in local area networks.
(2) the media
1, twisted pair
It can be divided into shielded twisted pair (STP) and unshielded twisted pair (UTP). Nowadays, star networks connected by UTP are more popular.
2. Coaxial cable
The transmission rate and anti-interference ability are between twisted pair and optical cable, and the cost performance is relatively high.
3. Optical cable
High data transmission rate, suitable for long-distance transmission, often used in ring networks or long-distance point-to-point connections (such as high-speed connections between two bus networks).
(3) Media access control method
Using media to realize the control of sending and receiving data for each node in LAN. There are three main methods: carrier sense multiple access CSMA/CD with collision detection, token bus token bus and token ring method. Among them, CSMA/CD and token bus are used for LAN with bus topology, and token ring is used for LAN with ring topology.
Respondent: Assistant Grade II 4- 16 12:42.
Using twisted-pair cross connection for serial connection, two machines can be directly connected without routing or switching. Ask where you bought the network cable. Data cable, not network cable. The seller of the network cable knows it. The network cable is about 1~ 1. Five yuan a meter is very cheap.
Answer: My good Qian Qian-trainee magician level 2 4- 16 13:09.
Two methods:
First, one of the machines is equipped with a dual network card, which is set to enjoy * * *.
Second, buy a router. The method is simple.
Interviewee: zrz 8888- assistant level 2 4- 16 13:3 1.
Direct method:
Go to the place where the line is sold and tell him to answer it directly
Go back and connect two computers.
good
-Yes, but you can't get online, and you have to set an IP address, which should be on the same network segment. Write casually, as long as the top three are the same. The subnet mask is the same.
Tell you the address:
The first set:192.168.1.2, with the mask of 255.255.255.0.
There is another one:192.168.1.3 with a mask of 255.255.255.0.
Gateway: 192. 168. 1.
Indirect method:
Two computers should be able to surf the Internet at the same time, and there is no need to route network cards, but connecting two computers directly with network cables can only establish a local area network.
There is also a way to enjoy the Internet without routing, that is, using a switch or hub, one computer dial-up network as a server, and the other as an agent to access the Internet.
Responder: marine kupe- Trainee Magician Level 3 4- 16 13:53
Give you a simple one. Both computers must have network cards and network cables, and the requirements are reversed. Plug it in and see the effect.
Respondent: Wu Peng 1 16- Assistant Level 2 4- 16 14:23.
Just connect the network cable directly. Add me Q326 1543. I'll send you a batch file for local area network interworking, and you can run it on two machines respectively. Nothing needs to be set.