Relevant knowledge of metal ground piles

Dimensions and models of metal ground piles

(

Unit: millimeters

mm)

A*B*H

51*150*600

71*150*750

71*150* 900

71*200*950

76*150*750

91*150*750

91*150*900 < /p>

91*200*950

96**150*750

101*150*900

101*150*950

p>

101*200*950

121*200*900

How to use metal ground piles

1

, How to use metal stakes for fences

Metal stakes for fences

Metal stakes

Generally used to fasten and tighten metal fence nets,

Plays a fastening role,

preventing it from being broken by livestock such as cattle and sheep,

or being damaged by disaster weather, causing cattle and sheep to cross the boundary, and outsiders to enter at will, causing unsafe conditions. necessary losses.

Generally, you can use a hammer to hit the upper square position of the ground pile. According to the geological soil conditions, tap

8

to

The ground piles can be inserted into the soil and fixed.

When using,

Please note that

Always pay attention to the soil condition where the ground pile is inserted,

prevent it from falling on the ground

p>

There are stones blocking the trajectory of the piles into the soil,

so as not to cause the piles to not penetrate into the soil smoothly,

and cause damage to the piles.

At the same time,

should also pay attention to the softness and hardness of the soil

to prevent soft soil from causing poor reinforcement performance.

2

How to use spiral ground piles

Screw ground piles

are generally used to reinforce tents in sandy areas.< /p>

Prevent the tent from being blown away by the wind.

At the same time, the spiral ground pile has better gripping ability than the general oblique ground pile in sandy and soft soil

.

Usually, an iron rod with a diameter of about

1

cm is needed, inserted into the small hole on the top of the pile in opposite directions, and then < /p>

Turn the ground pile clockwise until the spiral part enters the sandy soil.

Note that

screw piles cannot be used in hard soil conditions

to avoid a decrease in work efficiency.

3

How to use metal wood foot protection stakes

Metal wood foot protection stakes

Used to protect wooden The wooden support legs of the appliance prevent damage during use and extend the service life of the wooden appliance.

When using,

must choose wooden foot protection stakes of appropriate size.

Put the wooden foot protection stakes onto the legs of wooden appliances.

Insert it all the way,

then tighten it with wood screws and you can use it.

Classification of metal ground piles

1

,

Live metal ground piles

Used to fix wooden Fences, used for tents, mobile homes, greenhouses, flagpoles, guardrails, fences, etc.

,

can be reused for a long time

.

2

,

Square metal ground stakes

are used to fix wooden fences.

Used for tents,

mobile houses,

greenhouses,

flagpoles,

guardrails,

p>

Fences, etc.

,

can be reused for a long time.

3

,

Metal stakes for gardens or lawns

Various brackets, mini

L

type,

H

type,

T-T

type,

U-L

type,

T

type

4

,

In-line metal stakes for gardens or lawns

Including various brackets, mini

L

type,

H< /p>

Type,

T-T

type,

U-L

type,

T

Type

5

,

Spiral metal ground nails for gardens or lawns

Mainly used in soft Soil or sand

,

Includes various brackets, mini

L

type,

H

type,

T-T

type,

U-L

type,

T

Type

6

,

Bolt type metal ground stakes for gardens or lawns

includes Various brackets, mini

L

type,

H

type,

T-T

Type,

U-L

Type,

T

Type

7

,

Cement type garden or lawn stakes

Includes various brackets, mini

L

type ,

H

type,

T-T

type,

U-L

Type,

T

type

Service life of metal ground piles

1

, metal ground piles Material

Metal ground piles

are generally made of ordinary steel welded, generally using

2-5

mm iron Metal sheet,

10

mm gold

processed from iron rod.

2

. Processing technology of metal ground piles

Metal ground piles

Generally, they are cut, bent, welded, and pickled , electroplating, shaping and other processes can produce qualified metal ground piles. Among them, pickling and electroplating is an important anti-corrosion treatment process, which directly affects the service life of metal ground piles.

3

Factors affecting the service life of metal ground piles

The level of metal processing directly determines the service life of metal ground piles, such as the quality of the iron metal selected, The quality level of welding points

whether there are blisters, false welding, peeling, and the thickness of welding points will all affect the future service life and subsequent processing of metal ground piles

The quality of electroplating,

Pickling is an important basic anti-corrosion process,

And the quality of electroplating,

such as the time of electricity,

will affect the quality of the anti-corrosion treatment of metal ground piles. In most cases, the plastic reshaping process is to improve the appearance of the ground pile.

The environment and method of use also affect the service life of metal ground piles, such as the acidity and alkalinity of the soil, whether the operation is appropriate

Improper use may cause damage to the metal ground pile surface,

cause the metal protective layer to be damaged,

lead to gold

The corrosion of ground piles is accelerated and their service life is reduced.

Under normal circumstances, metal ground piles can be used

8-10

years