I. Material preparation
1. stainless steel plate: high-quality materials should be selected when purchasing, with no obvious defects such as scratches and depressions on the surface, and the thickness is generally between 0.5 mm-1.2mm.
2. Glue: choose glue with good sealing effect and strong adhesion, which can be well attached to the wall and stainless steel plate.
3. Hand tools: including cutting tools, grinders, rulers, pencils, paint brushes, pruning tools, etc.
4. Safety equipment: gloves, goggles, masks, etc.
Second, the construction steps
1. Marking determination: Mark the installation position and size of the stainless steel plate on the wall according to actual requirements to ensure that there will be no deviation after installation.
2. Cutting stainless steel plate: according to the measurement of marking, cut the stainless steel plate into the required size with tools such as manual cutting tools and electric hacksaw.
3. Polishing the edges: After cutting, the edges of the plates need to be treated with a grinder to make them smooth and tidy.
4. Wall treatment: Before the stainless steel plate is pasted on the wall, it is necessary to clean the wall to ensure that the wall is clean and flat, so as to facilitate the pasting of glue.
5. Glue sticking: Apply the glue evenly, thinly and bubble-free, from bottom to top to ensure its uniformity, and then apply the glue on the stainless steel plate.
6. Install stainless steel plate: stick the stainless steel plate with glue on the wall according to the scribing, pay attention to the compression between the plate and the wall, and use auxiliary tools to ensure that the plate is evenly compressed up, down, left and right.
7. Finishing: After the glue dries, use a paint brush and other tools to evenly brush the glue along the grain direction of the board to make it more flat and beautiful.
In a word, the construction method of stainless steel mirror panel on the wall is not complicated. As long as the preparatory work is well done and the construction steps are followed step by step, the wall can be made more beautiful and atmospheric. However, it should be reminded that safety should be paid attention to in the construction process, and random operation is strictly prohibited.