Both can be used, whether it is the original 8mm diameter quick screw or 10, mm diameter quick screw, as long as there is a suitable interface to fix the faucet, many friends have tried the G 1/4- 10-L quick screw of Dongyuan Core Rui and replaced it with an N 10 pipe.
The basis for determining the size of the master cylinder and the master cylinder needle is the demand of the product. The first principle is to choose integers as far as possible; The second principle is to use bobbin and bobbin needle whose diameter does not need to be machined as much as possible; The third principle is that when the product is not an integer and cannot be adjusted to an integer, the bobbin uses an integer slightly smaller than the product, and the bobbin needle uses an integer slightly larger than the product hole; ...
All the above specifications refer to the British system: 1/8, which means that one inch is divided into eight parts on average, that is,1/8 * 25.4 = 3.175mm1/4, that is, the concept of 6.35mm3/8 is the same as above, that is, 525mm refers to the diameter of the mold water pipe; The larger the waterway, the better the refrigeration and heating efficiency; Generally speaking, 1/4 is widely used, depending on the product structure and mold structure;
According to the thickness/demoulding inclination evaluation of the product ejection position, it is recommended to use thimbles for small products, and the thimbles for large products are less than 5 mm in diameter. .....