1. Date adjustment: Press the adjustment button, the word "adjustment" will be displayed on the display screen after about three seconds, and then enter the mode of adjusting the digital display. Press the mode button to rotate the set items in turn. When the items flash, you can change them. Just set the time and date of digital display according to the flashing content. After adjustment, press the adjustment button to exit the setup mode.
Second, set the second hand: press and hold the adjustment button until the word "H.SET" is displayed, and the word "00" will flash on the display screen. It's time to adjust the second hand. Use the light key and the search key to adjust the second hand to the direction of 12. The SEARCH key rotates the pointer clockwise, and the LIGHT key rotates the pointer counterclockwise.
3. Setting minute hand and hour hand: When adjusting the second hand, press the mode key to enter the setting interface of minute hand and hour hand. The search button rotates the pointer clockwise, the light button rotates the pointer counterclockwise, and also aligns the minute hand and the hour hand in the direction of 12.
Four, after the adjustment, press the adjustment key to exit the setup mode. After that, the hands of the watch began to rotate quickly until the time displayed on the digital display dial. So the date and time were adjusted.
Matters needing attention
It is found that the inconsistency between the watch pointer and the digital clock is generally caused by insufficient battery power. Try changing the battery. If it doesn't work, it needs to be adjusted.