If the ice seed jadeite is rough, you can improve the appearance of its coarse meat by wearing more jadeite in peacetime, or go to a professional shop to polish the jadeite to make it look more delicate and shiny. However, these practices cannot fundamentally change the essence of ice jade meat.

After the jadeite is polished from the original stone, it is polished with coarse sandpaper for many times, then with slightly fine sandpaper, and then with fine sandpaper. Finally, it can be finished by polishing with cloth.

In the process of wearing jade, don't engage in activities that are too big and easy to bump. It is also necessary to avoid the danger of falling off during the process of taking off and putting on the jade bracelet. If the jade is broken, not only will its value be greatly affected, but it will also be extremely difficult to recover! Emerald belongs to high pressure and low temperature jade.

There is no way to change the roughness of jadeite crystals. Just pay more attention to maintenance during wearing. Jade maintenance involves many aspects, and the most basic maintenance is to clean jade regularly.

The surface of the jade bracelet is rough and not smooth, so you can find a professional jewelry store to polish it. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping. Put the carved jade bracelet and a certain amount of polishing powder into a roller with a grindstone, and then inject a proper amount of water.

How thick is the emerald crystal?

1, coarse-grained particles can be used to make jade bracelets, jade pendants, jade rings and jade bracelets.

2. Jadeite is a crystal composed of many substances. If the jade crystal is rough or accompanied by impurities, its aesthetics and value will be very low, and the jade crystal is also directly related to the old and tender jade.

3. There is no way to change the roughness of jadeite crystal. Just pay more attention to maintenance during wearing. Jade maintenance involves many aspects, and the most basic maintenance is to clean jade regularly.

4. Yes. Because the crystal structure of jadeite is coarse, there is friction in the process of long-term wearing. With the continuous penetration of sweat sebum, it reacts subtly with the crystals inside jadeite, resulting in some changes in the cotton of jadeite, so the crystal structure of jadeite will become finer and finer.

How to deal with the rough jade crystal? What is a rough jadeite crystal?

It is not good for jadeite crystals to be rough. The jadeite crystal with good water planting and high transparency is very small, almost invisible to the naked eye, and the crystal arrangement is very close, so that people can't see the cracks in the crystal arrangement.

Coarse crystal means that jadeite has large internal particles, rough structure and bad variety.

Jadeite is a combination of many substances. If the crystal of jadeite is rough or accompanied by impurities, its aesthetics and value will be very low, and the crystal of jadeite is also an important factor directly related to the aging and tenderness of jadeite.

The coarse foundation of jadeite refers to the large or uneven size of the particles that make up jadeite, which is similar to what we call coarse seed difference. The species of jadeite refers to the structure and structure of jadeite, which is one of the important symbols to measure the quality of jadeite.

The weight of jadeite cotton is different from that of coarse crystal. According to relevant public information, the weight of jadeite cotton is a component of the essence, which can effectively replenish water, moisturize and moisturize the skin, making the skin smooth and delicate, while the coarse crystal is a component used to clean the face, which can effectively remove dirt, moisturize and balance the water and oil balance of the skin.

There is no way to change the roughness of jadeite crystals. Just pay more attention to maintenance during wearing. Jade maintenance involves many aspects, and the most basic maintenance is to clean jade regularly.

How to make the coarse particles of jade smaller?

1, the big jade beads can be ground smaller. However, the value of big jade beads should also be considered. If the value of beads is low due to the smaller grinding, it is completely unnecessary to do so. After all, the labor cost of grinding jade beads is not very low, so there is no need to grind them small.

2. Usually, it is polished with coarse emery bar first, and then with fine emery belt, which is a high-tech and laborious work. Manual polishing method of jadeite: how to polish jadeite? Polishing is also called "roughening", that is, the surface of jade carving semi-finished products is polished with a "rubber mill" to make it more delicate and smooth. This is some simple preparation before polishing.

Once the cutting is finished, I can grind the jade roughly with a grinder. First, I will smooth the jade with a big grinding wheel. This step can effectively remove the uneven parts of the surface and make the jade smoother.

4, touch: real jade heat transfer and heat dissipation is faster, we can stick it on the face or the back of the hand, and soon it will feel cold. And those imitations or defective products are not obvious.

5. First, use electric tools to install the diamond drill to decorate the jade pieces, and then use the diamond assorted file to repair them carefully. Use circular sandpaper (made of coarse sand and fine sand) to polish a large area. Apply polishing paste to the circular cloth wheel for large-area polishing. Use a felt grinding head to apply polishing paste for fine polishing. Rubber grinding head can also be used for direct polishing.

6. Prepare materials. You need water, sandpaper (different sizes from coarse to fine), jade, candle oil or lubricating oil, gloves and masks. Rinse the jade surface with water to remove dust and stains, and dry the water with a towel. Put the jade on the flat plate, wear gloves and masks to protect the skin and respiratory tract.

I bought a jade bracelet. The granules are very thick and the edema is not very good. Can you change it after wearing it for a few years?

Hello! The change of mineral grain texture needs the growing environment, that is, nature. You have it all. You are not the environment that can make him change. If you can wear it, change it. You can buy a thicker one, wear it at home, and then sell it to make money. Only on behalf of personal views, don't spray if you don't like it, thank you.

Emerald bracelet, crystal particles interwoven in the form of fibers, wearing for a long time. With the passage of wearing time, sweat sebum seeps into the interior, which will affect and change the mineral composition of amphibole, feldspar, chromite, limonite and so on.

The jade bracelet hasn't changed after being worn for a long time. Because jadeite belongs to jadeite, which has been formed over hundreds of millions of years. Therefore, the essence and structure of the jade bracelet will not change with long-term wear.

Generally, it takes a year for a jade bracelet to change obviously, because when wearing a jade bracelet, the oil secreted by the human body will be absorbed by the bracelet, so the longer you wear a jade bracelet, the more oil you absorb, which makes the jade bracelet more and more oily.