Car headlights can be modified in the following ways:
1. Replace the high-power halogen lamp;
Replace the original 55w halogen bulb with 100w high-power halogen lamp, and do not change other places. This is the simplest and most convenient way to modify.
2. Install the headlight brightener;
If the headlamp brightening cable is installed in the automobile headlamp and battery, the voltage loss of the cable will be reduced. It is expected that the voltage of the headlight and the voltage of the battery are basically the same, and the brightness that meets the objective requirements of the original halogen lamp can be obtained.
3. Replace the xenon lamp bulb;
Lensless halogen lamp: directly replace it with xenon lamp of the corresponding model, but due to the use of the reflective bowl of the original halogen lamp, the lighting can not be used reasonably, and the lighting effect is limited, which is necessary for other travelers.
Halogen lamp or xenon lamp with lens: the effect will be quite clear after replacing the xenon lamp, because the original car already has a lens, and the spotlight will be better. How much the specific effect can be improved depends on the quality of the light bulb used and the lens of the original car, which meets the requirements of objective conditions. The budget is not much, and the requirements for car lighting are not very high.
4. Replace the headlamp assembly.
Simply replacing the light bulb is not effective and there are necessary risks, so the whole transformation scheme is feasible. Some manufacturers have produced some popular automobile assemblies, including xenon headlight assembly and le d headlight assembly, which can directly replace the original automobile assembly. There are various decorative lights to choose from in the assembly, and the installation is simple and cool, greatly improving the lighting effect.
However, the quality of accessories, bulbs, stabilizers, lenses and decorative lights in the assembly is basically the majority, which is suitable for small partners who don't want to destroy the original car assembly, have high budget and are not picky about the effect.