First of all, clean

1. Qipao with brocade fabric is not suitable for washing.

2. If the cheongsam is accidentally dirty, you can use a wet cloth to spread it in the dirty place for ironing, and the dust will adhere to the cloth, which not only cleans the cheongsam but also plays the role of ironing.

3. If you choose hand washing, thoroughly check the clothes before washing, mark the key polluted parts, and then check the seriously polluted parts in the water.

Pretreatment can be carried out. According to the types of stains, wet towels can be dipped in different washing liquids and gently wiped to remove or weaken the stains. After decontamination, it can be soaked in water with washing solution for a short time, and the time should not exceed 5 minutes.

4. It should be reminded that special detergent for silk or other acidic laundry detergent should be used, and ordinary washing powder and soap should never be used. Because conventional washing powder and soap are alkaline, mulberry silk fiber is not alkali-resistant.

Before putting into clothes, the washing liquid should be evenly dissolved in water. When washing, the water temperature should be controlled below 30℃, and it should be handled with care. For the heavily polluted parts, you can rub them carefully and avoid using too much force. You can also gently brush along the texture of the fabric with a soft brush.

6. The washing time should be controlled within 10 minute. Colorful cheongsam can also be washed with a little salt to fix the color. After washing, rinse with clear water. Generally, rinse at least twice until the lotion is rinsed clean. Finally, you can add a little vinegar to the rinse and keep the silk of the cheongsam. During the whole washing process, it is necessary to prevent rings, bracelets and nails from scratching clothes and causing spinning.

7. Bleached clothes can be squeezed and dehydrated, but they can't be twisted hard or dehydrated by machines. After removing excess water, the cheongsam should be simply reshaped, and then spread dry or hung in the shade to dry. It can't be exposed to sunlight or dry. If the dried cheongsam has wrinkles, it can be ironed. The ironing temperature should be controlled at 165℃? 185℃, dry ironing or rolling ironing can be used, and direct spraying of clothes is prohibited. The ironed clothes should be kept in a ventilated place until the damp heat disappears, otherwise it will easily lead to mildew.

8. Chemical fiber fabrics and cotton fabrics

You can choose dry cleaning or washing. Generally speaking, fabrics with serious pollution or jacquard technology are best dry-cleaned, and other products can be washed by hand. Use water temperature below 40℃, conventional washing powder or soap, knead and wash, rinse with clear water, wring out or dehydrate by machine, then hang out and iron at medium temperature.

Third, ironing

1. Different fiber structures and properties have different ironing temperatures.

If the temperature is too low, the purpose of heat setting cannot be achieved, while if the temperature is too high, the fiber will be damaged.

Even melting or carbonizing the fibers.

2, distinguish the fabric, targeted ironing. Blended interwoven fabric, its ironing temperature

The choice of degree should be low or high, that is, ironing the fiber with the worst heat resistance.

Thermal temperature to be determined.

3. Factors such as texture and color thickness should be considered. Thick, the ironing temperature can be appropriately higher; Thin, lower ironing temperature. Color-changing ironing

The temperature should also be lowered appropriately.

4. Pay attention to the moisture content of ironing. Usually, when ironing, you should sprinkle some water or spread a layer of wet cloth on your clothes, and make the fibers moist with the lubrication of water molecules.

Wet, expand and stretch, and quickly enter the predetermined arrangement position under the action of heat.

Finish the design

5, tussah silk clothing generally can not spray water, otherwise it is prone to water stains.

6、

Vinylon clothes can't be sprayed with water or ironed with wet cloth. Usually use dry cloth to iron, because vinylon will shrink or even melt when exposed to high temperature in wet state.