Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - What models of bucket elevator are there?
What models of bucket elevator are there?
Common models of bucket elevator:

1, TD bucket elevator

TD bucket elevator mainly uses adhesive tape as traction component, and the main models are: TD 160, TD250, TD3 15, TD400, etc. Its hoppers are divided into Q-type (shallow bucket), H-type (arc-bottom bucket), ZD-type (medium-deep bucket) and SD-type (deep bucket), which can be lifted by 40 meters per hour.

2. Z bucket elevator

The appearance of Z-type bucket elevator is Z-type, which can convey materials horizontally-vertically-horizontally, feed at single point or multiple points, and discharge at single point or multiple points through the discharging device. It is suitable for conveying powdery/granular/viscous materials, with an hourly conveying capacity of 100 cubic meters and a lifting height of 2 ~ 100 meters.

3, plate chain bucket elevator

Plate-chain bucket elevator adopts plate chain as traction part, which is self-feeding and gravity discharging, and has a wide lifting range. It can not only lift general powdery, granular and massive materials, but also lift materials with high grindability, and the material temperature is ≤250 degrees. The chain is made of high-quality alloy steel and high-strength plate chain, which is wear-resistant and reliable. The drive part adopts hard tooth surface reducer, which runs smoothly. The transportation capacity is as high as 800 cubic meters per hour, which can be increased to 40 meters.

4, TB bucket elevator

TB series vertical bucket elevator adopts plate sleeve roller chain as traction component, and the hoppers are fixed on the chain plate and arranged continuously. The bucket elevator with inflow loading and low speed and heavy load can transport 800 cubic meters of medium, large, brittle and grindable materials with bulk density less than 2t/m3 per hour, and the temperature of the materials does not exceed 2500℃, such as lump coal, ore, pebbles, coke, etc. , lifting height 40 meters.

5, chain bucket elevator

The circular chain bucket elevator adopts circular chain as the traction part, which is mainly used for vertically conveying powdery, granular and small-block grindable materials. There are two forms: single/double channel, which improves the transportation capacity by more than 30% compared with ordinary models, and the lifting height reaches 50 meters, and the transportation capacity reaches 365 cubic meters per hour.

The above is the common model classification of bucket elevator. Each different type of bucket elevator has different conveying materials, bucket speed, lifting capacity and motor power, so users need to choose carefully.