Skills of repairing electroplated wheels. The repair method is as follows: 1. Check the scars. If there is no damage inside the hub, it can be repaired simply. Wipe the surrounding scars with paint thinner to remove dirt; 2. It is difficult to remove dirt from the deepest scratch, and then it can be thoroughly cleaned with a toothpick; 3. In order to avoid drawing irrelevant parts by mistake, it is best to carefully stick adhesive tape on the surrounding scars; 4, brush tip finishing, brush decorative paint, the paint hole shrinks slightly, it is best to apply a little protruding part; After brushing, you have to wait for a week to dry. After drilling, dip soapy water in waterproof paper to make the appearance smooth, wipe it with waterproof paper, polish it with mixture, and then wax it.