Outdoor folding table is light and portable, which is very suitable for outdoor activities. There are many outdoor folding tables available online now. If you have strong hands-on ability, you can also make one yourself. Here are some ways to make outdoor folding tables:
Exercise 1
1. Prepare manufacturing materials and tools: wooden boards, electric drills, saws, tape measures, loose-leaf hinges, nylon ropes, right angles, hammers and nails.
2. The cut wooden board is positioned with the aid of a right-angle device, hammered into a right-angle arch bracket with nails, and inserted into the beam plate at the middle height of the two legs of the bracket.
3. Make four wooden shelves, tighten the screws and connect the shelf brackets with loose leaves.
4. Drill holes in the middle of the beam and slab, and tie both ends of the rope head after passing through the nylon rope.
5. A pair of shelf table brackets can be folded in half when not in use. When they are used, a simple folding table is formed by opening a board on them.
Exercise 2
1. First make a small shelf at the back, and fix the shelf with wood gluing screws.
2. Then make the desktop and legs on both sides, and pay attention to the hollowing out and cutting style of the legs.
3. Fix the table legs and shelf side plates with long hinges, and test whether they can freely expand and contract.
4. Finally, link the desktop with the shelf beam with a long hinge (the reason why the side hinge is installed first and then the desktop is installed is to let the desktop wrap its legs).
Exercise 3
1. Saw bar: 4 table legs, 4 desktop support bars, 4 short fixing bars and 2 long fixing bars (the length is greater than the thickness of the short table legs).
2. according to the height of the table you need, drill holes at the intersection of the four legs, and the positions of the four holes should be consistent.
3. Drill a hole at the joint of the table leg and the table top support rod. The drill bit is slightly larger than the bolt.
4. Start assembling the table frame. Nail the inner leg with short fixing rods and nails first, then nail the outer leg and fix it with bolts.
5. When bolting, you will find that the bolt head protrudes from the table leg and the support rod, and the table leg cannot be combined. At this time, it is necessary to drill a countersink with a big drill to let the bolt head sink.
6. After installing the table frame, you will see that the top of the table leg protrudes from the plane of the support rod, so you should saw off the extra part, otherwise you will not be able to install the desktop.
7. Finally, fix the desktop on the table frame with wooden screws to finish the work.
Exercise 4
1. Materials and tools: boards, hammers and planers. Use paint-free eco-board on the desktop.
2, desktop edge sealing, gently knock with glue, compaction.
3. Scribing, planing and drilling lath, then scribing, sawing the position of falcon head and drilling.
4. Stick them together, then put them together and fix them with a wedge.
5. The legs of the table can be fixed by adding two window braces, and one end of the legs is connected with the desktop through a hinge.
6. Add a board under the desktop to ensure that the table will not collapse if the window is not tight.
7. Finally, two layers of varnish were painted on the legs of the table to facilitate cleaning later, and a simple outdoor folding table was made.