Ps can make concave-convex images. The specific operation is as follows: 1. Tools used: PSCS2.

Second, the operation steps:

1. Enter PS to open the image to be processed, open the layer panel, and double-click the layer to be embossed, as shown in figure:

2. Select "Bevel and Relief", and then adjust the appropriate parameters to get the concave-convex effect, as shown in the figure:

3. The final concave-convex effect is shown in the following figure:

How to make the effect of concave-convex logo in ps?

1. After opening the PS software, click the left mouse button in the menu file >; & gt click new to create a blank document, create a new layer 1 in the layers panel, fill it with light blue, then select a cartoon material map, use the magic wand tool to select the characters in the material map, and copy it to the newly created second layer.

2. Copy the new layer to two new layers and rename them. Click the left mouse button on the layer panel, and copy the newly-built layer to the newly-built layer 3 and layer 4. Rename the layer 3 as PS for concave effect and the layer 4 as PS for convex effect, so as to compare the different effects made later.

3. Select the layer (PS is concave effect), change the filling to 0, and select the bevel relief effect. On the Layers panel, select the layer (PS is concave effect), change its fill to 0, and then select the layer style bevel relief effect.

4. In the layer style bevel relief effect window, modify the direction and size parameters. Then, in the layer style bevel relief effect window, change the direction parameter to downward, set the size parameter to 1, and press the default values of other parameters.

5. Click the button with the left mouse button to compare the concave effect of the graph. Then click the button with the left mouse button on the bevel relief effect window to compare the concave effect in PS graphics.

6. Select the layer (PS is convex effect), change the filling to 0, and modify the parameters of the bevel relief effect. Select the layer (PS is convex effect) on the layer panel, change its filling to 0, then select the layer style bevel relief effect, and then modify the direction parameter to upward on the bevel relief effect window, set the size parameter to 1, and press the default values for other parameters.

7. Click the good button with the left mouse button to compare the convex effect of the graph. Then click the good button with the left mouse button in the bevel relief effect window to compare the convex effect in PS graphics.

8. Replace the background layer with the concave-convex effect to see the concave-convex effect. Then change the light blue background layer into a landscape picture to see the concave-convex effect under different backgrounds. A graphic has only one effect, and here a graphic can also reflect the concave-convex effect at the same time, which can make the graphic highlight the three-dimensional sense and increase the visual effect.

9. In the concave image layer and convex image layer, select the elliptical area to be deleted, select the graphic area in the toolbar with the left mouse button, then select the elliptical area in the concave image layer and convex image layer, and then delete. At this point, you can see that both graphics have become images with concave-convex effect.

10. After merging the concave image layer and convex image layer with the background layer, save the file. After both graphics become images with concave-convex effect, the concave image layer and convex image layer are merged with the background layer to save the file.

How does ps dig concave-convex watermark?

The specific methods and steps are as follows

111Read step by step

First, CTRL+J copies a layer.

2/ 1 1

Select lasso tool.

3/ 1 1

Draw a circle where there is watermark.

4/ 1 1

Select feathering with the right mouse button.

5/ 1 1

Click "OK".

6/ 1 1

Then right-click to fill in.

7/ 1 1

Select content identification.

8/ 1 1

Select normal.

9/ 1 1

Click "OK".

10/ 1 1

Repeat many times.

1 1/ 1 1

The watermark is removed.

Maya, how can you add another bump on the basis of normal?

Generally speaking, a normal map will only have a large concave-convex relationship after ZB carving. If you want to further superimpose the concave-convex effect, there are two methods. One way is to brush the texture bump directly in ZB, but only if you need to make a texture bump you want and import it into ZB for use.

The most convenient way is to superimpose a texture bump map in PS, which can basically achieve the effect. For details, it's best to ask questions at cg Pavilion Forum. There will be detailed instructions.

How does photoshopPS make a concave effect?

1, new (CTRL+N)600x500ps white knife background. However, after selecting Filter-Noise-Add Noise, the Add Noise dialog box will pop up.

2. In the variegated dialog box that pops up, the quantity is set to 40, the distribution is set to average distribution, and the color is set to monochrome. Select Filter-Blur-Motion Blur, distance 40.

3. Draw a rectangle marquee in the middle of the picture with the rectangle marquee tool. Click Select-Modify-Smooth, set the radius to 15px, and confirm to get the rounded rectangle marquee.

4. Right-click in the rounded rectangle selection box and select the copied layer (or use ctrl+j). At this point, there are more layers 1 on the Layers panel.

5. Double-click the blue part on the right of the 1 layer to pop up the layer style dialog box. Click "Projection" to set it according to the actual situation. Click "Bevel and Relief" to set it according to the actual situation; Click "Gradient Overlay" to set it according to the actual situation; Finally, click OK.

6. Make concave-convex effect: draw a rounded rectangle in the middle of the figure (refer to step 3), and then click the "Delete" key on the keyboard to delete it.

7. Add text and pictures (after the pictures are opened with PS, select them with the rectangle tool, then drag them directly, resize the redundant parts with ctrl+t, and then delete them with the rectangle tool). Finally, adjust the layer up and down to the appropriate position. It's done.

How does ps dermatoglyphic do concave-convex effect?

Ctrl+U palette, adjust the saturation to-100, and the image will turn black. Then ctrl+m will bring up the curve to enhance the black and white effect, and then use other tools to trim the local black and white depth.