Merlin, what about the sink?
1. Fine wire drawing process of Moline sink. The surface of ordinary sink is coated by electrolysis. After the coating falls off, the basin will be corroded and blackened quickly. Therefore, it is not a good choice. Fine wire drawing adopts a variety of polishing materials, and after eight processes, it presents silky texture, which is environmentally friendly and easy to maintain.
2. Molding process of Maureen sink countertop. Ordinary sink products must be fixed in reverse with a retractor to ensure the level of the countertop. Winstar kitchen and bathroom are controlled from a series of links, such as mold design, drawings, welding and molding. The height difference of sink table is less than 2 mm, and basically no retractor is needed.
3. Moline sink cold drawing process. Moline sink is different from ordinary sink. After heat treatment and pickling of stainless steel, it can be stretched. Winstead Kitchen and Bathroom has mastered the advanced technology of direct drawing of stainless steel, that is, "cold drawing": it does not destroy the chemical and physical structure of stainless steel, maintains the texture of stainless steel surface, and the processing process is completely environmentally friendly and does not produce pollution.
Skills of purchasing Maureen sink
1, judge whether it is stainless steel. The important feature of stainless steel is that it does not rust. When you buy a stainless steel sink, you might as well bring a magnet to suck it. Stainless steel has no magnetism.
2, choose the appropriate processing technology and surface treatment technology.
3. Look at the thickness of the steel plate. The imported 304 stainless steel plate is used for the sink, and the thickness reaches lmm, and the common middle and low-grade sink should also reach 0.5 ~ 0.7 RAM. When I bought it, I compared several models, and the natural amount of light was insufficient. In addition, the thicker the board, the easier it is to flatten.
4, look at the sink molding process. The good molding process of the sink is integrated molding, which avoids the corrosion and leakage of the welded part because it does not need welding. At the same time, the integrated molding process requires high material quality of steel plates, and the material quality of water tanks that can adopt this process will not be bad. In addition, the closer the internal angle of the water tank is to 90. The better, the greater the internal volume of the sink.
5, look at anti-noise processing. The bottom of the sink is sprayed or stuck with a rubber plate that is not easy to fall off, which can reduce the noise caused by the impact on the bottom of the basin when the faucet comes out. Without this technology or shoddy construction, it is not a product.
When we choose a sink, we need to consider its quality, and it is necessary to learn how to buy it. It is good for Maureen to sink into our life. That's how the Molin sink is and the skills of purchasing Molin sink introduced by Bian Xiao today are over here.