Required materials: Italian vegetable tanned leather snap button, slicing pliers, conical round knife, diamond trimmer, hammer foot oil, adhesive needle and thread, edge trimmer snap button tool, hand-sewn fixing fixture dye.

1, according to the finished cardboard, cut into leather pieces of different specifications with a leather knife.

2. Dye the edge with dye, and then polish the edge with an edge trimmer.

3. Install the snap fastener.

4. Adjust the sideline device and draw the seam range along the leather edge.

5. Draw the needle and thread spacing.

5. Sew the fixing fixture by hand, tighten the leather and sew along the line.

6. Trim the edge with an edge trimmer.

7. Trimming and dyeing.

8. The bottom of the bag is the same as above, and draw an edge line along the edge of the bag with edge markers.

9. Then sew the thread and edge it with an edge grinder.

10, edge trimming by edge trimmer, dye dyeing.

1 1. The pretreated bag is perforated and sewn to the bag.

12, cow's feet oil moistened cloth, smeared on jewelry bag, naturally dried, and the cowhide bag is ready. See the effect.