Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - Size and construction method of rural firewood stove
Size and construction method of rural firewood stove
1, rural firewood stove size: height: the height of the stove should be between 0.85m and 0.85m or between 0.93m and1.00m. Width: the width of the stove should be between 0.46m and 0.6m or between 0.56m and 0.63m..

2. The height and width mentioned here are the finished surface of the cooker, that is, the net height and width after completion. Its height should be calculated from the zero height of the floor tile to the level of the stove. Its width is also the widest distance of the desktop diameter. If the outside of the desktop is arc-shaped, its widest diameter should not exceed 0.62m, and then it naturally bends to the narrowest part, and its narrowest diameter should not be less than 0.49m.. ..

3. Determine the construction location, open the exhaust flue and build a chimney. Mark the ground to determine the position, and mark the wall to determine the height. Excavation of smoke exhaust pipes in the wall. Build a chimney outside the house.

4. Ordinary brick furnace body, including furnace door ash outlet and furnace cavity. The furnace chamber is built with refractory bricks, and the space between the furnace body and the furnace chamber is filled with broken sand and gravel.

5. Thermal insulation and fireproof structure of furnace cavity and furnace surface. Fill the insulation material to protect the broken sand and brick sand used in the furnace, compact the refractory mud above the furnace with a pot, and flatten the refractory mud.

6, warm water mouth pot mouth construction. Heat preservation materials and refractory mud have been put in the pot before construction. The position where the pot contacts the refractory mud is surrounded by steel bars to ensure that the pot mouth is firm. Smoothing the surface of the stove with mortar is generally 78cm high.

7, ceramic tile decoration, installation of furnace door flue damper. You need to wait fifteen days before using it.