2. Open the packaging bag, immerse the splint in water at room temperature of 20℃-25℃ for about 4-8 seconds, and squeeze the non-woven cotton by hand for 2-3 times;
3. Take out the splint, squeeze it by hand or wrap it with a dry towel to remove excess water;
4. Place the thick non-woven cotton layer on the inner side of the splint near the skin, and place it in the position where it needs to be fixed.
5, according to the need to shape, at the same time with gauze bandage or elastic bandage winding fixed;
6. The operation should be completed within 3-5 minutes, and the hardening will start in about 10 minutes, and it will be completely solidified after 20 minutes, and it can be finalized and assembled after 30 minutes;
7. When the fixed part has skin injury or needs long-term operation, the splint can be directly wound and fixed with gauze bandage or elastic bandage without soaking, and then sprayed with water on the thin outer layer of non-woven fabric to accelerate hardening;
8. The splint can be easily removed.
The above is the instructions for the use of Hitchenbonnie polymer splint. Hope to adopt.