1.5-2.5 Use 86 degrees to adjust the pressure at least three times (including 86 degrees below 86 degrees). If the size requirement is not very high, only 90-degree bending is needed to reduce the material thickness, and multi-pass bending can be calculated according to the middle diameter size; If the requirements are very high, it will be troublesome. Different materials have different thicknesses and materials. If your material is thin, it won't make much difference. ? The bending coefficient has a great relationship with bending R. The specific calculation formula is that the bending coefficient (z) of stainless steel plate is 0.2~0.3t, generally 0.25t?