When the baby's teeth are not full, it is easy to drool, and food residue will fall on the clothes when eating. In order to prevent the baby's clothes from getting dirty, you can make a bib for your baby yourself. What is the cutting size of the baby bib? How to cut and sew baby bibs? The practice of baby's bib is very simple. Let's study together. Cutting size of baby bib

1. The fabric required to make this baby bib single layer is about 35cm (and horizontal length of hem) ×45cm (width). Fold the front of the cloth inward according to the width, align the folding center line of the front of the pattern with the hem of the cloth, draw the outline of the pattern and cut the cloth.

2. Cut 2 pieces of bear pocket cloth, and then diagonally cut some straps with a width of 3cm. The total length of the binding tape is about 230cm (the finished binding tape is also acceptable).

How to sew a baby's bib

1. Sew the pocket first, align the front faces of two pieces of cloth inward and sew a circle, leaving a seam of about 5cm at the bottom edge, which is back sewing.

2. Cut some teeth on the suture and turn them from back to front.

3. Turn to the front, sew the opening with a hand sewing needle and iron the edge; Press a bright line between the bear's ears (that is, the mouth of the bag); Do some facial decoration (this step is best done before sewing two pieces); Everything is ready. Fix the bear's head in the middle of the bib.

Then sew the bear's face and bib together and reinforce the head and tail with inverted needles.

5. Sew the two strips of fabric and lining with the front respectively, then separate the seams and iron the two sides.

6. Nest the back of the fabric and the back of the lining together, and sew all the edges sparsely. The sparse seam should not be too wide, and should be kept within 0.5 cm.

7. The next job is piping. First, connect the cut pipe strips into a long strip.

8. It is more convenient to sew piping. First of all, the piping is made from the back neckline around the whole bib (except the neckline). Starting from the left back neckline, wrap the edge of the bib with the piping tape, and the edge of the bib should touch the middle hem of the piping tape.

9. Take the front of the bib as the working surface, wrap the edge, and press the line at the edge of the piping (this piping method looks the same on both sides, but the premise is that the ironing width of the piping must be uniform).