Job responsibilities of the mechanical processing department (selected 10 articles)

In the era of continuous progress, we can come into contact with job responsibilities in more and more places. Job responsibilities are a concrete Customized job descriptions that can be classified into different job types. What job responsibilities are effective? Below are the job responsibilities of the mechanical processing department (selected 10 articles) that I have collected and compiled for your reference. I hope it can help friends in need.

Job Responsibilities of the Mechanical Processing Department 1

Main Responsibilities:

1. Participate in product project feasibility research and system solution design;

2. Formulate structural design plans and project plans, research and develop new product structures and new technologies, and improve product performance and quality;

3. Undertake the detailed design of product structures and components;

4. Responsible for the development, debugging and related technologies of prototypes;

5. Tolerance analysis and dfma (design for manufacturing and assembly) inspection;

6. With manufacturing Engineers conduct mold review;

7. Mold sample review, design changes and final approval of parts;

8. Provide machinery for various tests such as emi, esd, safety and reliability Support;

9. Solve problems in product development, track issues and discuss technical issues with customers;

10. Provide technical support for mass production of products.

Job ability requirements:

1. Proficient knowledge of fluid engineering machinery design;

2. Proficient in plastic parts, sheet metal, die-casting and casting, etc. Part design; ensure that the parts are simple in design, high in quality, with few defects and low in manufacturing cost, and the corresponding mold structure is simple and easy to manufacture and process.

3. Be proficient in the assembly design of the product; the designed Product assembly should ensure that the assembly process is simple, the assembly efficiency is high, the assembly defects are few, the assembly cost is low and the assembly quality is high; it ensures that the product design is completed in the shortest time, the lowest cost and the highest quality;

4 , Master the knowledge of tolerance analysis; be able to use tolerance analysis to optimize the design quality of products and solve practical problems encountered in product development;

5. Be familiar with relevant knowledge of materials, molds and surface treatment processes;

p>

6. Have the ability to analyze and solve problems (5w, etc.);

7. Be familiar with the product development process, especially the product development process for manufacturing and assembly, to shorten product development time and improve the quality of product development;

8. Be familiar with relevant product testing requirements, such as emi, esd, safety and reliability, etc., and design products to meet these requirements;

9. Be familiar with Product industry standards for fluid engineering machinery;

10. Proficient in using CAD, solidworks and other software, and familiar with fluid and stress analysis software;

11. Good innovative spirit; can learn triz Relevant theoretical knowledge;

12. Team spirit, by working with teams such as manufacturing engineers, assembly engineers, and test engineers to improve the quality of product development. Job Responsibilities of the Mechanical Processing Department 2

1. Job Responsibilities:

1. Design, development, installation and debugging of non-standard automation equipment, functional testing equipment and industrial robot application systems; < /p>

2. Based on the project plan and the customer’s technical requirements as design input, carry out design and development work such as equipment integration design and outsourcing parts selection.

3. Responsible for technical communication with customers after the introduction of the entire project, electromechanical interaction with the electrical person in charge of the project, and coordination with procurement and manufacturing;

4. Able to Independently complete and be able to organize project team members to complete the preparation, modification, updating, and archiving of project output data;

5. Responsible for after-sales service technical support for related projects;

6 .Complete temporary tasks assigned by the company.

2. Job requirements:

1. Bachelor degree or above in machinery, mechatronics, automobile manufacturing and other related majors;

2. More than 3 years Non-standard equipment mechanical design and project management experience;

3. Proficient in using at least one 3D design software;

4. Familiar with the project operation process;

5 .Good English communication skills;

6. Full of innovative consciousness and proactive spirit, good communication and coordination skills and teamwork spirit.

Job Responsibilities of the Mechanical Processing Department 3

Responsibilities description:

1. Design of the main structure of the manipulator, physical calculation and selection of mechanical components;

2. Development and Design robot parts, combine the actual application of the robot, and comprehensively consider equipment cost, mechanical function, and overall appearance optimization;

3. When installing the robot equipment, provide on-site guidance and supervision of the installation to ensure mechanical accuracy, quality, and progress; < /p>

4. Actively organize standard operation training for workshop assembly team members;

5. Other temporary jobs

Job requirements:

1. Bachelor degree or above in equipment or mechanical automation related majors, proficient in operating three-dimensional solidworks software;

2. Have more than three years of working experience in injection molding and sheet metal robot automation equipment, and be able to independently design mechanical structures;

3. Responsible for the drawing design work required in product development, manufacturing, improvement, and marketing;

4. Team awareness, strong sense of work responsibility, and strong coordination, organization and solution problem-solving skills, as well as good communication and expression skills. Job responsibilities of the Mechanical Processing Department 4

Responsibilities description:

1. Under the leadership of the chief engineer, carry out the production of welding positioners, welding tooling, welding auxiliary equipment, and non-standard automation equipment Design, procurement, outsourcing, assembly, debugging, training, etc.;

2. Responsible for the sorting and archiving of technical documents and patent applications;

3. Responsible for other tasks arranged by the company affairs.

Job requirements:

1. Be honest and down-to-earth, with strong executive ability and sense of responsibility;

2. Be humble and studious, and work rigorously and meticulously;

3. A three-year contract and a non-competition agreement are required;

4. The work cannot be completed in time due to capacity issues and needs to be completed by working overtime (the above five points are required);

5. Have experience as a front-line mechanical technician or related non-standard automation design experience; Job Responsibilities of the Mechanical Processing Department 5

Job Responsibilities:

1. Take the initiative Develop users and look for sales opportunities;

2. Responsible for order taking, technical support, sales and payment collection of spare parts business, and complete sales tasks;

3. Maintain customer relationships and actively Handle after-sales issues and improve user satisfaction;

1. Responsible for the sales and promotion of the company's products;

2. Complete departmental sales targets according to the marketing plan;

< p>　3. Open up new markets, develop new customers, and increase product sales scope;

4. Manage and maintain customer relationships and long-term strategic cooperation plans between customers.

Qualifications:

1. Mechanical, electrical and other related majors;

2. Applicants with working experience in the sales industry or fresh graduates will be selected;

< p>　3. Quick response, strong expression ability, strong communication and interpersonal skills, and affinity;

4. Possess certain judgment ability and good customer service awareness;

5. Responsible and able to withstand greater work pressure;

6. Have a team spirit and be good at challenges. Job Responsibilities of the Mechanical Processing Department 6

Responsibilities Description:

1. After confirming that the component repair work has been completed as required and that the technical status of the components meets the airworthiness requirements, the completed component worker shall sign , Responsible for the quality of component repair;

2. Responsible for completing the handover of components with the aviation materials repair engineer;

3. Responsible for handing over the signed and completed component repairman card to the accessory repair workshop , the workshop arranges personnel to review and submit it to the Quality Management Department;

4. In addition to performing the duties of component repair, the component repair mechanic should also assume the duties of component quality inspector and other positions as needed;

5. Complete other tasks assigned by superior leaders.

Job requirements:

1. College degree or above;

2. Have a good work record and 2 years of experience in repairing kitchen equipment parts ( Inclusive) and above, no serious maintenance errors have occurred in the past two years;

3. Have the ability to organize, coordinate, communicate, execute and plan. Those who love the parts repair industry, have a good sense of work responsibility, and have sufficient experience in kitchen parts repair are preferred;

4. Hold a civil aircraft license stipulated in the "Civil Aircraft Part Repair Personnel License Management Rules" of CCAR-66 Parts repairman license ELC is preferred. Job Responsibilities of the Mechanical Processing Department 7

(1) Participate in the formulation of construction machinery and equipment usage plans, and be responsible for formulating maintenance plans.

(2) Participate in the formulation of construction machinery and equipment management systems.

(3) Participate in the general layout of the construction and the purchase or leasing of mechanical equipment.

(4) Participate in the review of special equipment installation and disassembly unit qualifications, safety accident emergency rescue plans, and special construction plans.

(5) Participate in the safety management and supervision inspection of the installation and disassembly of special equipment.

(6) Participate in the inspection and acceptance of construction machinery and equipment and safety technical briefings, and be responsible for the filing and registration of the use of special equipment.

(7) Participate in organizing the education, training and qualification certificate inspection of construction machinery and equipment operators, and establish files for special mechanical operators.

(8) Responsible for supervising and inspecting the use and maintenance of construction machinery and equipment, and inspecting the safe use of special equipment.

(9) Responsible for implementing safety protection and environmental protection measures for construction machinery and equipment.

(10) Participate in the investigation, analysis and handling of construction machinery and equipment accidents.

(11) Participate in the preparation of quotas for construction machinery and equipment, and be responsible for the establishment of machinery and equipment ledgers.

(12) Responsible for the statistics, accounting and approval of routine maintenance expenditures for construction machinery and equipment.

(13) Participate in construction machinery and equipment rental settlement.

(14) Responsible for the preparation of construction machinery and equipment safety and technical management information.

(15) Responsible for summarizing, organizing and handing over mechanical equipment data. Job Responsibilities of the Mechanical Processing Department 8

1. Responsible for the mechanical feasibility demonstration of new product development;

2. Responsible for the development and design of product mechanical parts, and participate in related products and parts Surveying and mapping of components;

3. Responsible for preparing detailed lists of materials, accessories, and standard parts required for products;

4. Cooperate with other subsystem engineers to coordinate Complete the development of the complete machine product and prepare relevant production process documents;

5. Participate in the assembly testing of new products and related technical tests;

6. Participate in writing new product research and development reports; < /p>

7. Participate in the analysis, discussion and preparation of technical standards for product machinery, prepare relevant technical documents, and assist product managers in continuously improving the mechanical design of finalized products.

Job requirements:

1. College degree or above in mechanical design, industrial modeling, mechatronics and other related majors;

2. More than 3 years of experience in industrial instrument products Design work experience, project management experience is preferred;

3. Proficient in operating SolidWorks, CAD, PRO/E and other design software; familiar with mechanical transmission, precision machining technology and related technical standards; familiar with metal and sheet metal , Material properties such as profiles and mechanical parts design and processing technology;

4. Good communication skills, expression skills, and proficiency in using office software; Job responsibilities of the Mechanical Processing Department 9

1 , Carry out technical management on the company's machinery and equipment.

2. Responsible for all technical guidance of the company's mechanical equipment, guiding and solving difficult technical problems that occur with the company's mechanical equipment, and ensuring the normal utilization and integrity of the company's mechanical equipment.

3. Responsible for the approval and implementation of operating procedures, safe operation procedures, maintenance procedures and various management systems of mechanical equipment.

4. Review the company's mechanical equipment management ledger, review the mechanical equipment management work plan, major (item) repair plan, annual maintenance plan and spare parts processing plan, and provide guidance and review of outsourced mechanical equipment and spare parts plans.

5. Responsible for the comprehensive technical business leadership of the comprehensive group and maintenance group of the machine repair shop.

6. Adhere to the principle of "three no-misses" for equipment accidents, host an analysis meeting on equipment accidents that occur within the company, put forward handling opinions and preventive measures, and organize inspections and rectifications of potential accident hazards

< p>7. Participate in the economic and technical demonstration of the company's technological transformation planning and production equipment update selection and purchase, and organize and implement them separately according to the division of responsibilities.

8. Organize and formulate technical training work plans for the company's mechanical equipment maintenance personnel, and organize and implement them specifically to ensure the completion of training tasks.

Job Responsibilities of the Mechanical Processing Department 10

(1) Research and develop process technology;

(2) Prepare process planning and design floor plan;

( 3) Carry out process design and write process documents;

(4) Carry out process management;

(5) Design, manufacture, assemble, install and debug process equipment;

(6) Research and design methods for measuring geometric dimensions;

(7) Monitor the quality of the manufacturing process and analyze the causes of failure;

(8) Conduct material testing , non-destructive testing of blanks and parts, non-destructive testing of equipment, and reliability analysis and evaluation of equipment;

(9) Research, development, promotion, and application of new technologies in processing and testing;

(10) Prepare, promote and apply standards for processing technology, testing methods and required equipment;

(11) Conduct technical appraisal, evaluation and arbitration of equipment;

(12) Conduct chemical analysis, mechanical property testing, metallographic structure and smelting quality inspection of materials and blanks.

;