The advantages of applying aluminum alloy formwork are as follows: due to the light weight of aluminum plate, the formwork has good pressure-bearing conditions, which is convenient for the rapid construction of concrete mechanization; By using the configuration board of standard board and local non-standard board, and adopting the numbering technology on the non-standard board, the standard board of the same component can be mixed, which makes the assembly speed faster; The aluminum alloy template is easier to operate and faster to assemble and disassemble; The template is fixed with pins, which is much more convenient to install. Due to the early dismantling design, the horizontal member formwork can be dismantled after 36 hours. When the template is installed, there is a multi-stage operation platform, which is convenient to move and ensures the safety of operators when installing and disassembling the template; The surface quality of concrete after aluminum alloy formwork removal is very good. According to the planned construction, the formwork installation is smooth and firm, and the concrete surface can achieve the effect of fair-faced concrete.

economic advantages

Unlike wood formwork, aluminum formwork can only be deformed once. In contrast, aluminum formwork is used more frequently, and the use of all-aluminum formwork is obviously higher than that of steel formwork, wood formwork and composite formwork, which has obvious advantages in the construction of high-rise buildings. After accounting, as long as a set of all-aluminum alloy formwork is used for more than 50 times, the cost is the same as the amortized unit price of traditional wooden formwork.

The other is to save the construction period and reduce the rent of large equipment. Compared with other templates, all-aluminum template has many advantages such as convenience and quickness. During the structural layer construction of this project, the aluminum alloy formwork saves two days on average for each layer.

In the project of applying aluminum alloy formwork on the surface, the cost is greatly reduced, and the effect of structural surface can really reach the effect of fair-faced concrete. In the decoration stage, the process of plastering and leveling can be omitted for the inner wall surface, which directly eliminates the common problems of hollowing and cracking of plastering for the indoor wall surface.