Hammer for quarrying, weighing 12 kg, weighing 14 kg. The hammer handle is composed of three bamboos instead of wooden sticks, which is more flexible and effective. Small hammers, wooden handles and steel drills vary in length, depending on the depth of the hole. The crowbar varies in thickness, and it is easy to choose according to the size and separation of the stone. Chisels, also known as "crystals", are used to punch "axe eyes". There are two kinds of sharp points, the sharp one is used to guide the eyes and the blunt one is used to wedge the axe eyes. The chisel is flat and square, and is used to shape the separation block. Steel drills, chisels and chisels are forged with hexagonal angle steel on average.
use a tool
The tools used in rough machining of stone carving are: a small hammer for knocking; Chisel, square mouth, used to remove large diagonal materials; Chisel, sharp mouth, used to carve the surface of parts. Hand drill.
Accomplisher
Tapping (sharp flat mouth) and oblique cutting (oblique flat mouth) are both used to remove stones, similar to chisels, but smaller in size, and there are many models according to different carvings; Chopping axe, with a flat mouth like an axe, used to chop the surface of a stone; Plum blossom hammer, with plum blossom spots on the surface of square mouth, is used to cut a large area of stone surface, which is more efficient than chopping axe; Steel bars, slender and sharp, are used to carve stones, and there are many models according to different requirements of carving.