1. Check whether it is caused by shifting to the wrong gear. When some people stop and turn off the engine, they do not put the gear in P gear, but directly put it in D gear. Because if you put the gear in D or R, you can't turn on the ignition. Only if you put the gear in P or N, you can turn on the ignition. Therefore, when he wanted to light the fire again, he could not light it.

2. Check if the car is out of gas. In addition to the fact that the battery is dead and the ignition cannot be started, the ignition cannot be started when the car is out of gas. Usually this happens because the ignition is not turned off when getting out of the car, which consumes fuel and electricity, so the car cannot start the ignition.

3. Is there a fault with the gasoline pump? The reason is somewhat similar to running out of gasoline. If the starter can run normally when the ignition is turned on, but the car does not start, you need to check the gasoline pipeline to see if there is a problem with the gasoline pump.

4. Check if the starter is faulty. The starter fails. This problem is very similar to that of a dead battery, which can also lead to a failure to start the ignition.

5. Is there too much carbon deposit in the throttle area? If the throttle valve has too much carbon deposits, it will also fail to fire. In this case, you need to step on the accelerator slightly to start the fire.

6. Check whether the crankshaft position sensor is faulty. There is damage here. When ignition is started, the engine's computer cannot receive the signal and cannot control the spark plug for ignition.

I hope it will be helpful to you and hope you will adopt it