1. Jade is jade. If it is worn for a long time, it must be highly polished again to fundamentally solve the problem of unsmooth, and it won't take long. It depends on the polishing process of the jade bracelet itself. If it is a soft and polished bracelet, it can be wrapped in fine cotton cloth and rubbed every day to slowly recover the oil.
2. If the surface of the jade bracelet becomes rough and no longer smooth, the jade bracelet can be polished to restore its luster. Wipe the jade bracelet with a wet towel first, then evenly apply toothpaste on the jade bracelet and polish it repeatedly 10 minute.
3. The surface of the jade bracelet is rough and not smooth, so it can be polished in a professional jewelry store. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping.
How to deal with jadeite jade without luster?
1, I didn't pay much attention to it before, and the polished layer on the jade surface gradually lost its luster due to friction. In this case, I need to get the jade processing point, re-polish it and restore its original appearance.
2. Jade has no luster. It can be restored by waxing maintenance, long-term playing and long-term wearing. The first function of waxing is to make jadeite shiny and improve the beauty of jadeite jewelry. In order to better establish a protective layer for jade ornaments.
3. If you don't wear jadeite for a long time, you can wipe it with cotton cloth, or soak it in purified water for an hour or two regularly, then wipe it clean and store it separately. In order to reduce its wear and tear, it is best not to put it with gold and silver jewelry.
4. The jadeite bracelet has been worn for a long time, resulting in friction marks on the surface of the jade body, resulting in no luster. Only by re-polishing can the luster be completely restored. 2. The jadeite bracelet, which is dull due to dirt adhesion, is soaked in concentrated rice washing water for several hours, then washed with a soft brush, and repeated several times until it is taken out.
5. Emerald is jade. If it is worn for a long time, it must be re-polished to fundamentally solve the problem of unsmooth, and it will not take long. It depends on the polishing process of the jade bracelet itself. If it is a soft and polished bracelet, it can be wrapped in fine cotton cloth and rubbed every day to slowly recover the oil.
How to increase the luster of jadeite jade
Regular cleaning First of all, friends who wear jadeite should clean jadeite regularly. The method is simple: soak jadeite in clear water for 30 minutes. If its surface becomes dirty due to long-term wear and tear, gently scrub it with a small soft brush after soaking.
If jadeite loses its luster, it usually needs to be cleaned once. Soak in clear water for more than 2 hours, then wash it again to make the jade absorb water, and then take it out to dry. Avoid contact with high temperature environment, do not put it in direct sunlight, and put a glass of water in its storage place.
Emerald is rubbed with colorless baby oil or olive oil. Wear of jadeite bracelet is an inevitable problem when worn for a long time, but it can nourish jadeite regularly and keep it lubricated.
To make jadeite shiny, you need to wear it for a long time, avoid sun exposure, avoid collision, stay away from acid and alkali, and wash it frequently.
Regular cleaning: jade pieces should be cleaned once in a while. After cleaning according to the above method, wipe it with a dry cloth until it is shiny. Always wear: don't put jade jewelry in a box for a long time, it will "lose water" and dry after a long time, so it is best to wear it often.