Operation skills of saw blade sharpening machine

1.

Tooth adjustment knob: sometimes because the grinding wheel is before grinding is completed? Improper tooth arrangement or other reasons lead to large grinding of the front corner of the sawtooth (technicians can judge from the grinding sound). At this time, it is necessary to fine-tune clockwise, fine-tune, fine-tune (important to say three times) the tooth direction adjustment knob of the grinding wheel, and pay attention to keeping the lock nut motionless, so that the front angle of the sawtooth is slightly ground and the rear angle of the sawtooth is slightly ground until the whole polishing is completed.

2.

Tooth depth adjustment button: rotate the tooth depth adjustment button clockwise to make the sawtooth tooth depth slightly shallow, and then finish grinding. Pay attention to grinding and polishing at a fixed speed for a period of time without using a grinding wheel, which is helpful to improve the grinding quality of the blade.

3.

Thickness of grinding wheel: 1.0 thick grinding wheel can be solved in most grinding scenes, but if the teeth are too small or too big, a thinner or thicker grinding wheel should be selected, with the thinner grinding wheel being several tenths of the thickness and the thicker grinding wheel being one to two tenths of the thickness.